Laying tiles on the floor with their hands

floor tiles are not only beautiful but also durable, easy to clean and maintain.For the installation of ceramic tiles on the floor, artist enough to have a small share of perseverance, accuracy, artistic taste, as well as the ability to do things on their own without the involvement of specialized professionals.

Before laid tile on the floor with your hands, you need to getthe necessary set of tools and materials, without which the process will is hindered or impossible.

Materials

• First of all, you will need to choose the very floor tiles, guided by the overall design of the room.Depending on the room in which the floor portion is located for laying the tiles, the material is selected with a glossy or matte finish.For security should take the tile with non-slip surface.
• buying tiles for laying on the floor, keep in mind that its actual consumption will exceed the floor area by 5-10%, as part of the material will go on Cutting and fight.All packages should review carefully sorted the possible deviations in size and shades.
• need to purchase a tile adhesive, based on the flow rate indicated on the packaging.The contractor should be prepared to the fact that the actual consumption of adhesive, depending on the surface of the subfloor can be different from the declared many times.
• for surface preparation for laying tiles on the floor, according to the technology, you need to buy a first coat of deep penetration.
• proprietary blend need for grouting.It is possible to choose different colors, focusing on his vision of the overall floor design.
• All mixes advisable to buy from a single source - this will ensure their proper interaction with each other.

Tools

for laying tiles on the floor need a minimum set of tools and accessories to ensure successful operation.

• It is advisable to purchase a set of plastic crosses the right size, a small trowel, plastic utensils for the preparation of the adhesive solution, a metal spatula with teeth.
• To prepare an adhesive solution, you will need a powerful drill with a mixer.
• Also needed: a rubber spatula, rubber hammer, pliers, Tile (depending on the area of ​​laying tiling, it can be a very simple design, or as a fully electric machine for cutting tiles).
• for measuring and applying marks on the tiles, you will need: roulette, building level, pencil, square.
• to protect the feet and hands of artist desires to purchase knee pads, gloves.
• to finish cleaning the floors should be reserved with a sponge and cloth.

step instructions for laying tiles

1. Starting the process of laying floor tiles, it is necessary, first of all, to prepare the work surface.To do this, you need to check the horizontal level of the sub-floor coverings, if necessary, to clean it from the roughness, vacuuming, cleaning surface dust and debris.Sex should be well rinsed to remove possible grease.In order to ensure reliability of the tile adhesion, the surface must be primed deep penetration.

2. Before laying the tiles on the floor, you need to markup the surface so that it turned out to mean at least undercut and new coating lying symmetrically room.For this purpose, it is advisable to see photos, videos on the website showing the nuances of the process.Experts recommend starting the implementation of marking the entrance to the room.Initially, the first row is laid dry to determine whether a breakdown.

3. Mixing the adhesive solution (using a mixer or by hand) requires strict compliance with the manufacturer's recommendations on the amount of added water and cooking techniques listed onpackaging.Experienced experts advise to prepare for just a small amount of the solution, focusing on tile laying speed.

4. After preparing the adhesive solution, you can start laying the adhesive on the floor surface with a trowel.Further, the adhesive is evenly distributed, through the use of notched trowel, comb.If large size tiles (side more than 30 cm), the adhesive should be applied on the tiles.

5. The first tile should be laid strictly focusing on inflicted on the floor marking the line, after which it will need to align horizontally, using a rubber mallet and level.When placing these tiles in a row, it is desirable to use crosses to meet the width of the seams between them.

6. The first row is ready.Next, we need to continue laying the next series of the whole tiles, laying on the floor right amount of solution.The correctness of the horizontal position is controlled by a level.

7. Having laid out the whole tile, you can start filling in areas that require trimming.To do this will require a pencil mark on the tile pieces of the desired dimensions required, taking into account the seam and a small gap to the wall.Markup tile is placed in a tile cutter for cutting the required pieces.If you want to perform a curved cutout, you need to draw the appropriate line on the tile, and scratching the surface with a glass cutter or core.Most of the tiles can be cut using a tile cutter or angle grinding machine, and finally give the required curvature - with the help of pliers.For more information, see the article on how to cut tile.

8. Having laid out the entire floor surface, you can start laying the tiles from the plinth.To do this, you will need a pre-cut strips of the necessary adjustment of the tiles, or buy ready-made elements of ceramic moldings.On the plinth glue is applied, after which it is placed on the wall with the orientation of the floor tiles.

9. Waiting for the adhesive has set, it is necessary to perform the work for grouting.To do this, you should prepare a mixture trowel and apply it on the joints, carefully fill them to the full depth.Excess mixture after 10-15 minutes you will need to remove the sponge.No less than an hour, with a damp cloth should be wiped with all coating and, if necessary, even wash it with detergent for tiles to remove white plaque.

Laid-yourself tiling get a beautiful, durable, reliable in operation, easy to clean.An impressive number of proposed tile laying options allow you to create your exclusive floor.

Video tile on the floor with their hands