Among the plurality of filter devices it is difficult to choose the one that best suited to the specific conditions.If we talk about mechanical water filters, they are designed to remove rust particles from water, sand and clay.Such units are often used, as the basis for the filter here is a special grid, which is made of different materials.Everything here depends on the volumes of water required for cleaning, as well as some other factors.

Varieties and characteristicsfilters, mechanical treatment

filters mechanical water purification won a modern market with its simplicity and versatility.With many interesting solutions, you can select a setting that is incredibly easy to use and maintain.If the classic charcoal filters must be replaced regularly succumb and thorough examination, in the case of the installation of a mechanical water treatment in this respect is clearly ahead.Quite often, the filter element will need to be thoroughly washed.However, it is rather a plus, because in similar facilities, where coal cleaner is used, washing is not provided.

There are also the washings filters for fine purification of water.They do not need to constantly wash, but the installation should be connected to the sewer.We are popular as settings for fine purification of water, and for the rough.It all depends solely on that of water, which must be cleaned of contaminants.

Features filters coarse mechanical treatment

strainers for rough water purification

grid, located at the base of the filter mechanical treatment is really effective device thatIt helps to significantly clean up the necessary volumes of liquid.Sometimes it is really hard to call the liquid water, which included a lot of dust particles of the coarse fraction.Such types of filters provide a reliable filtering of from 500 to 5 microns.It is best to use this setting if the source of water used - a well or borehole.In this case, very often you can meet a lot of sand particles and the mule.

Often mechanical strainers and water purification are used in the home.They are attached to the water supply, and successfully purified water until the filter is part of the installation is not clogged particles.It is also important to know that this type of filter is used for cleaning with cold water and hot water.Occasionally there are exceptions, so before purchasing advised to read the documentation.

Most filtration units is equipped with a grid element, and most of the other components can vary significantly.This includes design and general appearance, pipe diameters and the basic materials from which the filters and produced.

Thanks to the incredible simplicity of design, strainers most simple to install and replace them.To replace the filter is sufficient to block the water, unscrew the filter plug and clean the main element.For the last operation you just hold the filter element under a strong pressure of water.

main advantages strainers

1. relatively small cost of the filter.
2. really simple construction.
3. often small installation dimensions.
4. Elementary able to plant design.
5. filtering hot and cold water.
6. extremely rare replacement filter elements.

main disadvantages strainers

1. protection only on the large fractions of pollution.
2. regularly (once a month or less) the overlap of the water source for cleaning the filter.

Filters for coarse mechanical treatment of water, based on the cartridges

Despite the fact that the mechanical treatment is based on the removal of the water of large fractions of particles, such filters are also used and classic cartridges.The main difference between this type of filter mesh is the fact that the cartridges need to be updated regularly.This, of course, the extra costs, which can not be avoided.Filter with cartridges are also many unique varieties and forms, but it is the regular replacement of the main part of the plant and is the main feature.

Fine mechanical treatment of water and its features

Each main filter mechanical treatment should be fine to purify the volumes of water that are necessary in specific circumstances.This is because such plants are able to remove even the smallest particles, which threaten water quality.Most documentation for such filters indicate that they cope with particles less than 5 microns.This is a good result.

Filters fine mechanical treatment based on cartridges

vast number of filters have a minimum difference between them.The only element that can really stand out from the other parts of plants - is part of the filter.Cartridges in the case of fine mechanical cleaning can remove particles less than 5 microns.Often these plants find their application is in homes where the tap water is not the best indicators of quality.It is worth noting that the replacement cartridges - it's not cheap.Prices for mechanical cleaning filters vodymogut be the most unpredictable.Much depends on the company, which made the installation, as well as the quality of the filter portion.

Just as in the previous case, you will need to replace the cartridge, close the water supply.This will bring some inconvenience, but only for a few minutes.To disassemble the filter is necessary to use a special key to unscrew the bulb.Often, the key comes with the equipment.

main advantages cartridge fine water filters

1. small cost of the equipment.
2. Classy level filtering contaminants.

main disadvantages of fine water filter cartridge

1. the need for regular replacement of components of the filter elements.
2. complex dismantling of the bulb when replacing the filter part of the installation.

Features wash filters fine mechanical cleaning

Each wash filter mechanical treatment provides excellent cleaning even the most contaminated water.Often, these plants have mesh filter elements are successfully combined with the overall simplicity of design.Dot rotary principle of these filters ensures effective water purification.It is important to note that the design specifics allows you to clean the filter element without interrupting operation of the system.Very often, this possibility much comes in handy.

Some models have automatic filter backwash system.In this case, the person involved in the washing process of the filter portion is not provided.Of course, the cost of this miracle of technology is much higher analogues.Some models even have a certain set of brushes that are easy to remove any kind of dirt.

Advantages wash filters fine mechanical cleaning

1. quality cleaning and large amounts of water.
2. Cleaning the filter element without interrupting system operation.
3. replacement filter elements is very rare.

Disadvantages washing filters fine mechanical cleaning

1. must be connected to the sewer system.

pricing policy and range of mechanical water filters

Despite the overall simplicity of systems for water treatment, almost all of them cost quite expensive.Especially costly to purchase various filter parts, which, in addition, also often fail.In this case, we have a somewhat different situation.The wash filters without problems can work without replacement filters are often a year or more, and the built-in cleaning system will be able to quickly restore the initial properties of the element.

Filters coarse mechanical cleaning is also nice to show themselves in terms of frugality.Carbon filters for their cost is very cheap, and they need to be replaced very often.Some simple design makes it easy to make the necessary replacement parts installation.Often, these actions do not need experts, since the elementary manipulation filters can make even a child.

huge number of possible shapes and sizes of filters does not mean that to opt for the best instance that simple.The high cost does not mean that the equipment is good.Often bundled with filters supplied a lot of unnecessary things, which, moreover, is also very costly.About component parts of the installation is best to learn from consultants, who kindly provide all necessary information.