Dimensions polycarbonate sheet depending on the type , the average price

Before buying a sheet of polycarbonate in general, these two measures, and we are interested in - sheet sizes and prices.Once we settled on this type of product, it means that we are aware of all its characteristics and features of the application.

But on the dimensions (linear, thickness) and cost needed to stay separately.This will accurately determine the necessary consignment on the basis of the specifics of the installation in a particular location, and match needs with their financial capability.

Typical dimensions of polycarbonate

• 6 and 12 (m) - length;
• 2,1 (m) - the width of the webs;
• from 3.5 to 32 (mm) - thickness.

cost

polycarbonate Price is determined by several factors - the linear dimensions and thickness, color scheme, the manufacturer.Since a huge range of products, it makes sense to only give average data sheets colorless (transparent) depending on their thickness (in rubles / pcs.).

12 meters in length:

• 3,5 - 2 150 P;
• 4 - 2850 P;
• 6 - 4750 P;
• 8 - 5650 P;
• 10 - 6580 P;
• 16 - 11 650 R;
• 20 - 13 300 rubles;
• 25 - 16 490 R;
• 32 - 18 250 R.

Naturally, the price of similar paintings, but the 6-foot, less than about two times.

Colored sheets are more expensive than their counterparts transparent.The difference lies in the range 200 - 700 rubles.The thicker the plastic, so it is more.For example, the product of 4 mm - about 300 rubles, 16 mm - 450 rubles.

Useful tips

1. Calculating the size of the estimated cash expenditure, it is necessary to take into account the cost of purchasing additional items.Polycarbonates, unlike monolithic needs sealing the ends of product.Plus - connecting strap and several other components.
2. should know that not all manufacturers maintained well-defined dimensions.Large deviations from the common parameters (tolerance value) is characterized by the production of small firms and "firmochek".They work as a rule, "semi-artisan" method, and the technical possibilities often do not allow the equipment to achieve higher quality.Unfortunately, and with honesty, many of them are not all right.

Therefore, when purchasing a product unknown manufacturers need to independently perform all the measurements, and for each product.Of course, if we are talking about one-half dozen sheets, because when buying large quantities to make it impossible.Why do it?

For example, the difference in the thickness of the sheets do not allow them to produce high-quality alignment, sealing the joint.As a result, the occurrence of leakage when the first rain.The difference in linear dimensions complicate installation - sheets for a tight fit will have to trim.