Swimming pool in a private house

Who does not dream of that in your own home to have a swimming pool?Modern building materials market allows you to organize pools inside the building without investing a very considerable financial resources.However, this process must be approached very deliberately and knowingly.After all, there are cases when such an object after a device in the house began to accumulate moisture and mold appeared.To properly build a swimming pool in a private home is necessary to involve experts for this purpose.If you basically want to do everything with your hands, then you need to become familiar with all the intricacies of the process of building a swimming pool.

What types of pools

the indoor pools are called internal or covered.By and large, they do not differ from those of hydraulic structures, which are installed outdoors.Tanks for the pool can be a factory, and made on-site.Installed directly on the object bowl, make the classic technology using monolithic concrete casting.Another embodiment - is to use a faster technology that is collected from the design of reinforced concrete parts, steel sheets or propylene, which are amplified concrete screed.The most convenient way to apply fiberglass or polypropylene for the manufacture of the cup at the facility.

Indoor pools are different from those outside, that for their operation and maintenance you need to provide a range of engineering and technical communications.It includes not only the water supply system, but also ventilation, sewage, heating and electricity system.In some cases, the need is also the possibility of emergency relief, and even water drainage system.All of these systems greatly increase the load on the electrical network in the house that needs serious strengthening their own building or equipping the substation.To alter the finished house will be difficult, so it is best to lay the pool already at the stage of designing the house.

Accessories for home pools

Today firms are engaged in the installation of indoor pools, and outside too, equip their products with additional features.This can be hydro, wave acceleration system, trampolines, fountains and waterfalls, as well as various slides.The construction of the pool inside the building requires on the one hand additional costs, but on the other hand gives you certain advantages.Indoor swimming pool can be used year-round, there are no expenses for its preservation for the winter.Furthermore, substantially reduced energy consumption to heat water.

Build an indoor swimming pool can be in any room of the house.The technical documentation may involve equipping the pool in a separate building, with the ground floor, on the upper floors of the house and even a heated attic.The project must be provided the foundation of appropriate power, intended load on the liner, the strength and integrity of load-bearing frame structures and their reliability over the entire lifetime.Sometimes the pool constructions are building a separate room, that is the best option.

What are the nuances in the design of the indoor pool

Construction of indoor swimming pool in a private home is a complex and costly process, requiring competent and systematic approach.If your intention is construction, the first problem that you will encounter is the choice of a reliable contractor.It is best to choose a company that can provide a full range of services: design, installation of related engineering services, interior decoration, installation of equipment, installation of the pool and holding all other communications.Unfortunately, to find such a company is very difficult.To get out of this situation, you can consider two options: look for widebody business in another region or to conclude an agreement with several companies.When hiring several companies will have to find a superintendent to coordinate the activities of all companies on their own.

After the issue now resolved by the contractor, you can proceed to the realization of his dream.You should begin with the development plan and the solutions of architectural and planning issues.Come to you experts will carry out geodetic studies, calculate the amount of work and complexity, as well as to determine the dynamics of groundwater and soil conditions throughout the year.Based on these data, they will make a conclusion on the suitability of the site you have selected for the construction of hydraulic structures.If the answer is negative, they will calculate a place where it is best to build a swimming pool.In addition, they will advise what type of pool, and the shape of the bowl is best suited to you.During the construction of the pool in the room is already finished, engineers can create the tonnage of the building plan, then call several options for room layout and parameters of the cup.Their responsibilities include the development of water recycling schemes, selection of control automation and filtration equipment.

All the nuances necessary to discuss with experts, including circuit room ventilation system, the plan construction of utilities, the type of pool dehumidification system.Already at the design stage, you will know what is the area of ​​the water table, the power and performance of electrical and heating equipment.Installation work begins only after you have read and approve all plans and schemes.

What pool sizes are optimal for home

Form dimensions bowls are chosen depending on what is its purpose.Most are small and whirlpool spa baths (7 - 10 m2).If you plan to go swimming pool, it should be much more spacious, but its depth should be up to 2 meters.Without a doubt, any costs for the construction and design of these objects are met by derived from them pleasure and benefit.

Finished bowls come in several models presented producers.They are produced commercially by the approved size.It is unlikely that any plant agrees to change at the whim of the cup shape of small private customer.Serial production of the composite material bowl capacity from 6 to 180 m2 and a length of 2 to 13 m.

pool is mandatory when the pool construction paving circuitous paths.They are made around the perimeter of the bowl, following the slight slope away from the ledges.This prevents water from getting into the dirt and debris.The tracks must have a width of at least 40 - 50 cm. This is enough to not be injured.In order to comply with the ergonomics, the pools must be equipped with steps and handrails.

What is in the construction of the pool has a hydro

Waterproofing is the most important in the construction of the hydraulic structure, like an indoor swimming pool.Reinforced concrete structures by themselves are not a barrier to water.Since water has a strong stress on the pool wall, it is coupled with the temperature differences inevitably lead to the formation of microcracks.Through them, water can seep under the foundation, undercut and eventually destroys it.If you pour yourself a bowl of concrete, use only very high-quality Portland cement of high grades.Inside and outside the walls of the bowl must be treated with special polymer mastics and additional layers of penetrating waterproofing that is capable of clogging the pores of the concrete and create on the surface of the walls waterproof plastic film.Importance should be given to sizing seams, joints and corners of the bowl.

What microclimate created indoor pool

According to the school physics course, the surface of the water is able to evaporate huge amounts of moisture.At a temperature of 25 degrees to evaporate 220 g of water per square meter.The rate of evaporation and its volume is directly proportional to the size of the pool.The depth and variations in water and air temperatures also greatly affects the evaporation.

For year-round use of the pool must be very carefully consider the heating system.The main issues will be: the position and the number of devices and heating performance.These parameters depend on the size of your room and window area.Poor-quality resolution of these issues can lead to serious problems.High temperatures and high humidity create a fertile breeding ground for mold, bacteria and even pathogenic microorganisms.Accumulates on the ceiling of the condensate is able to destroy even a very solid construction for a short time.

pool To avoid this, you must install effective ventilation, which is supply and exhaust.On how competently she designed and installed your health will depend.Comfort in the pool water temperature should be between 26 to 28 degrees, and the temperature of 27 to 30 degrees.Thus humidity in the room must not exceed 55 - 65%.airflow circulation inside the building must be at least 80 m3 / hour per person.To solve this problem requires a comprehensive approach.It is best to install the automation, which will regulate the humidity, the dew point control, to prevent the formation of condensation and provides air flow.

air circulation system in

pool to ensure effective air circulation in the room with a pool is necessary to collect the ducts so as to isolate the water moisture from the other premises of the building.Ducting arranged depending on the design features of the building.For power units must have a dedicated technical room.It is best to install, both in air and exhaust ventilation equipment.This is due to the fact that the exhaust ventilation allows air to enter the house through the slit.And if only mounted plenum installation, the exhaust air is discharged to the outside there will be little.

systems for drainage basins

Where the ventilation systems do not cope with the removal of humid air from the room, to ensure the normal climate is necessary to use auxiliary dryers.They can be either automatically with built-in or external sensor, which are regulated by a timer.Dehumidifiers are floor and wall.They are usually designed to work in the room of 22 m2.If the pool area more than 40 m2, it is necessary to arrange the channel dryers.Separate application dryers unacceptable because they are not able to provide air circulation in a room, but can eliminate moisture.It is best to combine them with a ventilation system, despite the fact that this increases the cost.

principle of this system is as follows: moisture-laden air is sucked into a fan and passes through a special heat transfer element, wherein during cooling is transformed into a liquid condensate.It is removed by sewage.The heated dry air flows back into the room.Such equipment has a capacity of 15 to 110 liters per day.Power consumption ranges from 60 W to 1 kW.Number of dryers and their location determined by the pool area.Optimal location - near a window that does not allow to settle on the glass condensate.For safety reasons, all electrical appliances that are in the room for a pool, should be grounded.

pool inside the house - this is a very elegant and useful solution, which will allow you to enjoy life, without going beyond the walls of his house.