How to make a TV antenna to give their own hands

lucky owners of a country house or villa does not just have to deal with the problem: in remote areas of the city is simply no connection, so you can use your mobile phone or watch TV.If modern mobile phones are equipped with powerful hidden antennas to receive a signal from the TV to view the signal more difficult.The only solution - an external antenna.And not necessarily run to the store to buy expensive equipment - antenna problem (for GSM signal) can easily be done with your own hands!

If your cottage is already a weak signal and your TV is slightly catches the 1-2 channel, then you can improve the reception quality in a few minutes.To begin to understand that the station sends a signal located at a remote distance from your garden.And your TV now takes a random signal that has not been sent to a specific receiver.To signal became better, requires antenna (receiver) which directly transmit the TV signal.

antenna can be done from the old antenna and from a totally unsuitable at first glance things - improvised materials.

In a first embodiment, a look at how to make a classic dish to give their own hands:

1) wire.High-quality conductor must be selected by you on the basis of: 1.5-2 m to the antenna, 5-6 meters (depending on your interior) at a distance from the antenna to the TV.Suppose that you have chosen a wire with a diameter of 1.5 mm.

2) The outer part of the antenna.It is prepared from a wire.1-1,5 meters need to tighten a ring whose diameter ranges from 356 mm.up to 450 mm.

3) The interior of the antenna.It is necessary to make the wire of the second ring, respectively, smaller than the first (about 180 mm).

4) Ready-rings - is the foundation of the future antenna - needs to be fixed on a small piece of plywood.Instead of plywood, you can use any suitable piece of wood.The tree should not overlap with the ring and does not hang to the whole antenna was clearly fixed on the roof.

5) The finished design is necessary to send the ring in the direction of the signal source.No doubt will be a strong signal in the side of the city.At this stage, ask for help: the antenna must be turned in different directions, and check where the signal is better.Once you find the best option, your antenna is finally ready!

makes the antenna of beer cans

There are many ways to make a simple, high-quality (for high quality signal) TV antenna to testify.We reviewed the way to create a "classic" of the antenna, but there are non-standard solutions.For example, you can quickly make a dish out of old tin cans (from a Coca-Cola or beer).This antenna characteristics whit inferior to store-bought her innovations, plus the owner will testify save money.

to create antennas need a couple cans of 0.5 liter capacity, rosin, tin, a little duct tape, easy tape, clothes hanger (required plastic!) And 5-6 meters of cable television (which, incidentally, does not necessarily have to be new!).

1. The first bank need to solder the TV cable (braid, purified by 15-20 mm), and the other - the central conductor (of de cable).It will be easier to dip soldering tin and rosin, and then tin wire.The wires should be insulated with tape!
2. Banks secured to the rack, to the bottom.
3. is connected to one side of the cable
4. plug the connector to the TV.The antenna is ready!

This antenna can catch and a range of "m", if you use cans of not 0.5 liter and 1.0 liter.In the first case it was necessary to turn the antenna to "catch" a good signal, in the case of cans should be to change the distance between them (banks) on the rack.The very place the antenna near a window or balcony.

Thus, there are many ways how to make a dish to give your hands and provide yourself and loved ones a pleasant TV viewing outdoors.Antennas "homemade" in no way inferior to the store and can be a 100% substitute them (especially to make new antenna will be easier and cheaper than buying the store in case of breakage)!

Video - TV antenna with your hands