How to defrost the refrigerator

Start defrosting process

before defrost the refrigerator, you must unplug it from the power supply and set the thermostat to zero.Then should get out of it all the contents, put in a cold place, a pre-packaged in Thermo where possible.

Once the refrigerator unplugged from the outlet, natural defrost starts.In order to collect the water after melting of frost and ice, it is necessary to place the container on the shelves device, as well as placed under its bottom cloth of the well of the absorbent material to leave the system to stand for several hours (depending on the number namerzlogo ice, as well ascamera dimensions).

care device equipped with the function No Frost, is very simple - just unplug it from the mains, to get food, clean the walls, shelves and jumper and then on again.

Cleaning and disinfection device

then should wash all surfaces, shelves and removes parts of the refrigerator with a mild detergent.Thereafter, the internal walls can be cleaned soda solution to disinfect and eliminate unpleasant odors.When the cleaning device is completed, it is necessary to leave open the door camera for a short period of time to allow all parts to dry.

Do not remove when defrosting ice and namoroz using sharp objects, as this may damage the evaporator.It is also not recommended to use aggressive cleaning agents and granular powders - it can damage the anti-bacterial coating.

Once all surfaces are cleaned and wiped dry, can be filled with products and shelf unit connected to a network.

Fast defrosting refrigerator

If the time is not enough for complete defrosting, and it is necessary to perform, there are ways to reduce the time required for this process.Before you defrost the refrigerator in an accelerated mode, it is necessary to remember that any sudden change in temperature inside the chamber or mechanical action on the blocks of ice formed during the operation, freezing can damage the evaporator and mechanisms, as well as to destabilize the system.

defrost Acceleration is as follows:

• necessary to install the container filled with hot water on the shelves of the device, periodically pour in hot water to cool down.This will allow the ice to melt faster
• reduce the defrosting time you can use the hot air using a hair dryer or fan heater.By directing the flow of hot air on Frostscale wall to get rid of ice and frost can be less than two hours
• In order to work on the ice on a chemical level, you can put a plate with salt or vinegar inside the freezer or sprinkle fat ice salt on top.This will lead to the erosion of the ice crust and accelerate the defrosting process.After that, you must thoroughly wash the internal surface to avoid damage.

conduct during the cold season defrosting refrigerators recommended about once every four months, and in the warm time - every two months.Clean and disinfect the device with a dry freezing is recommended twice a year.