Pediment of corrugated board - as is practical ?

Pediment of corrugated board - the pros and cons

What is profiled wall stuff?This zinc-coated with various polymers or profiled metal sheets.Their shape can be very diverse and depend on the coloring dyes used in the production of shielding materials.

Lightweight sheets can significantly reduce the load on the load-bearing structure of the building and its foundation.Through the use of corrugated board, significantly reduced the cost of construction, and there is no need to involve heavy machinery.

facade of corrugated board has a number of advantages:

1. absence of any waste during installation.
2. The relatively low price of the material contributes to substantial cost savings.
3. If necessary, it can be easily removed.
4. low weight enables the use of lighter frame construction.
5. material is highly durable, which significantly increases the operational safety of buildings.
6. Easy assembly and processing.For this purpose, the simplest hand tools.

Like any other building material, corrugated facade also has its drawbacks:

1. monotony of appearance, which can not hide even the extensive color range of the polymer coating.
2. Galvanized sheets differ low resistance to moisture, chemical attack and sudden temperature changes.
3. To improve the insulating characteristics of the coating require the simultaneous use of various thermal and acoustic insulation materials.

Corrugated facade - it does not spoil the material when cutting?

Despite the fact that corrugated board is a seemingly ordinary sheet of corrugated metal, cutting it a bit different from the usual.Since its surface is covered with a protective layer of polymer, the use of thermal processing techniques are contraindicated.

required to exercise maximum caution not to damage the layer.Therefore, for a more suitable floorings cold processing methods.Mainly used for cutting sheets of ordinary hacksaw.A lot of effort on it is not necessary, since the material is characterized by its malleability.

For curly sample can use an electric jigsaw, which is much faster and more convenient.It is important to accelerate work help manual or electric roofing scissors.The use of grinders for cutting corrugated board is only allowed with special abrasive wheels.They are somewhat thinner and are made of conventional cemented carbide, and their edges are provided with small teeth.

Cladding Decking balconies and gable

Before mounting the sheets on the gable on the surface of the waterproofing layer is laid, which will provide the required level of ventilation, as well as help prevent the formation of condensation.Then superimposed on top of the insulation.Then proceed to the installation of lathing, which is made of bars, section 5x5 cm. Now you are ready to install the sheeting.

Fastening sheets is carried out using self-tapping screws that screw in the trough of the wave profile.To do this, use an electric drill equipped with a ratchet.Between a wall sheets connected with screws or rivets.

similar way done and paneling Decking balcony on the outside.You should first fix the wooden slats to the balcony frame.For this drill, metal drill holes 3,5 mm in diameter.They should be located on the same line, the distance between them should be maintained in the range of 1 m.

Next, a carrier rail (section 4x2 cm), its length should be equal to the length of your balcony.In order to raise the decking on the balcony, use a special wooden frame, to which the rope is attached.For this work, it is desirable to involve the assistant.

Mounting trapezoidal sheet is held in one direction: from the corner to the corner.Between the extremes of sheets and walls need to leave a gap of about five millimeters, which will be installed metal bracket for fixing the side pieces.At this briefing as to sheathe balcony Decking, it can be considered complete, it's time to take the tool in hand and get to work.