Build Daily

Building Materials

August 12, 2017 18:08

Know how many boards in the cube , it is better in advance!

click fraud protection

How many boards in the cube from different angles

Do cubic and cubic meter - is not the same thing, except the volume of this unit can be calculated differently than it is carried out according to mathematical rules?These completely fair questions may arise from any person who is faced with the purchase of construction lumber to distort the most incredible way cubic meters.Let's open a little secret - sellers can really be considered differently according to the input parameters of wood.

other words, calculation is carried out on acceptance of the table, which shall be based on the volume in cubes one meter board or other timber.Most vendors in this regard has its own point of view.Less shrinkage of the volume, but in view of the fact that often the calculations are obtained fractional numbers, which are always cut not in your favor, you can be sure that one or even several boards per cubic meter will turn less.

How many boards in the cube should be an average

Knowing exactly which timber you need, it is easy to remember, a number of boards in the cube can be.Come to be out of the board size.Actually, the material could also be playing a role, but only in case if you needed to compare the cubic meter of wet and dry board.Well, as lumber purchased after drying, only their dimensions are taken into account.

So, for a six-meter edging board 25h100 amount per cubic meter will be 66.6 units.At the same time be prepared in advance to ensure that fractional part is always reduced in favor of the seller .However, maybe you hit the right merchant who will not spare the time, effort and material and took you to the desired piece.40h100 format boards is 62.5 units, and with dimensions of 50x100 - exactly 33.3, that is, less than half than the first format considered.As you can see, to count the number of boards in 1 cube, simply arithmetic.

How to calculate the cubic boards mathematically

receiving timber from the warehouse, you are likely to perform standard mathematical operation by multiplying the thickness and width of the board on its length, respectively, each measuring unit, for example, the same lining.Thus you get the same amount of boards.And by dividing the cubic meter of this is the volume, it is easy to know how many boards in the cube.But, it's just when you're dealing with cut board, and how to calculate cubic boards if timber edging?

stacking height edging boards to determine its volume is measured taking into account the thickness of the interlayer tabs multiplied by their number.

In this case, proceed as follows.Boards are stacked, so that on one side all the end faces are aligned, each row tight fit without gaps, but without overlaps.

sides of the stack also should be relatively smooth, possible projection of the board in any number of no more than 10 centimeters.Then measured the height of the package, its length up to the point of maximum density rows of stacks, as in the case of edging boards to talk about the same length is not necessary.

instagram viewer