Installation of plastic pipe with his hands

acquire tools

Today, many people have to make replacement of the heating or plumbing system to a new one, because the metallic communication rotten or clogged.Many people prefer to change the pipe to metal and plastic, obmednennye or the metal again.As practice shows, laying polyethylene pipes - the most affordable and easiest option.

installation of polyethylene pipes with their own hands will require the availability of such tools: scissors for cutting pipe, soldering iron, Gas keys, linen.Soldering is sold with a set of nozzles for different diameters.Scissors, if desired, can be replaced with a jigsaw, although better than they.

When cutting pipes scissors edges are smooth, free of nicks and burrs.Gas key required for installation with fasteners of metal on polyethylene.

Despite the variety of other tools for the reliable connection of pipes used flax, because these compounds are always dry.Tools for mounting of plastic pipe can be purchased at any hardware store.Soldering iron with a set of nozzles are often sold with a pair of scissors in one set, specifically to look for them is not necessary.

What should be done before starting work?

When available, you can create a project water, gas, sewerage or heating system, depending on what exactly you need.Technology laying polyethylene pipes is quite simple.More look at the installation of pipes on an example of the heating system.

Calculation of the necessary materials should be carried out, depending on the number of differences, angles.First, you need to cover all the water tap, then arrange all the materials of the project and proceed to the installation.

need to start laying the boiler, if the home heating system.It is required to determine the size and produce a spike of scraps of metal pipes with connection fittings.The connection of polyethylene pipes also produced a soldering iron.Proper operation of the soldering iron is not difficult to learn.There are many technical nuances, which includes the installation of polyethylene tubes, video on our portal will help to visualize the described operations.

Making the installation correctly

Mount Technology polyethylene pipe is as follows: on the edges of the tube to length, pre-cut with special scissors at an angle of 45 degrees chamfered.After that, the edge is inserted into the prepared soldering tip at the same time with the connection fitting, wear a different nozzle.

The simultaneous heating occurs, then heated items quickly removed from the nozzle and connected within seconds.The main thing - the simultaneous heating and the desired temperature of the soldering iron.Usually it placed 270 degrees Celsius.After that, the connection should be allowed to cool for a couple minutes.It is not necessary to use forced cooling, because it will affect the quality of the weld.

necessary to pass around the perimeter of the project drawn up by successively connecting the pipe with fittings and radiators.Spike ends at the boiler output member.Then the system is filled with water and the boiler is turned on.It is necessary to systematically inspect all connections for leaks.Then expose the boiler to the required pressure and the radiators deflate.