What glue for wallpaper will be better?

Deciding to change the situation at home and carry out repairs, many are beginning to wonder what the best glue for wallpaper, and how it is the characteristics and properties of the composition should be chosen?

Wallpaper - This is the fastest and least expensive way to completely change the look of the room.

With them, you can not only update the look of a room, but also visually increase the size of the interior space, making it more fresh and attractive.

Meanwhile, if used for pasting wallpaper defective or incorrectly matched adhesive, it is possible to achieve a completely different effect and at which the coating is bad snaps on the wall surface and begin to fall off and eventually peel off.For

nonwoven, paper or vinyl wallpaper use different compounds which are selected primarily on the basis of the characteristics of the wallpaper.

Currently, you can buy the wallpaper, on the basis of which has already been done a certain part, and in this case it is enough to moisten them just a little bit, then you can glue on the wall surface.

In all other cases, vinyl, paper or non-woven wallpaper adhesive will have to buy separately and it must be done correctly.

Photo:

Varieties glue

currently, you can find a large selection of different fixing means in specialized stores, is specially designed for different types of wallpaper.

very popular special funds, which are sold in dry form.

themselves, they are fine powder or granules, before proceeding with the relevant work, such a mixture must be diluted with water, while respecting certain proportion.

It should be noted that the need to dilute the mixture with water, dry - is virtually the only drawback of this adhesive.

Very often among the dry adhesives can find a universal, which is equally suitable for vinyl and paper, and for non-woven types of finishes.

In such mixtures are based on special chemical reagents and elements that form a good grip with the wall surface.

In preparing the dry mixture is necessary to control the density and viscosity agents.

for material that could be called heavy, it is better to use a thicker mixture, in turn, it is easy to be moderately thick, in addition to paper wall-paper should be prepared in the form of the composition of some water.

Video:

liquid mixture is completely ready to use and does not require any pre-treatment before use.

Generally, liquid mixtures are mainly used for the vinyl type or non-woven material, which have a hard texture.

They provide high strength material adhesion to the wall surface.

should also be noted that it is possible to find a glue that is used for gluing the material to the joints among different basis finished compositions.

he produced in small tubes, and its price is quite acceptable.

At the heart of any structure for fixing the material to the wall are certain reagents, which form as a result of the fixing mass, providing the necessary traction surfaces.

In order to determine what type of glue is the best, you need to start to determine the type of material with which to work.

It is best to purchase those compounds that produce a well-known companies.

adhesive Choice

before selecting adhesive for wallpaper, you need to start to define the structure of the material itself.

When selecting adhesive decisive role played by the type of wallpaper themselves, which are planned to be glued to the surface of the wall.

If the choice is made in favor of the generic type of glue produced on a dry basis, in this case, its preparation should be carefully monitored for and thick texture.

For example, heavy or non-woven vinyl wallpaper glue is dry you need to cook at maximum density.In turn, the type of paper wallpaper, it is desirable to glue liquid glue.

Video:

It should be noted that the stores can be found adhesive designed exclusively for vinyl materials that have improved strength.

can also find glue for non-woven wallpaper that captures even stronger and is also suitable for those types of wallpaper, which are designed for painting.

Any paper types of wallpaper can be glued using absolutely any kinds of universal glue.

In turn, textile, velor, and especially fiberglass discharged particulate adhesive composition which has not only high strength but also water resistance.

disadvantage of particulate adhesive is that when it gets to the front surface of the spots are still visible.

should be noted that such exotic types of wallpaper as bamboo or cork, it is recommended to glue exclusively on liquid nails, and apply the composition should be from both sides.

There is also a special glue, which is designed exclusively for the wallpaper, which are lint-free surface.

These types of wallpaper can be attributed fabric, jute and reed wallpaper.

In any case, the most suitable adhesive is one that is suitable in all respects for the material from which made the wallpaper.

cooking technology adhesive

If the choice is made in favor of the dry mixture, which is based on a special mixture of fine, before you start to glue fabric to the wall surface, it is also necessary to prepare properly.

To do this we must take a certain size plastic container, which should be clean and dry, as well as to prepare a tool that is convenient to stir the paste until a homogeneous composition.

further into the container filled with water at room temperature only.The water should be neither cold nor hot, as in this and in another case, the mixture will lose its original properties.

Thereafter, the fine powder of the pack should be carefully pour in the water, thus it is necessary to mix it all up carefully until completely disappear all kinds of lumps and the mixture itself is smooth.

or for non-woven vinyl wallpaper should be prepared sufficiently viscous mixture, which will provide good adhesion to the wall surface.

If you have to work with the material on a paper basis, the mixture should get a liquid and transparent.

Note that a paper-based material can be glued on to the wall structure, prepared independently, which is called paste.

This freshly prepared mixture has good adhesive properties and provides high-quality material with a grip surface of the wall.

For its preparation is necessary to take a common starch, which is mixed with boiling water.Before using the paste is imperative to insist in a cool place.

As a result, the starch mass must have a certain viscosity to be homogeneous and free of lumps.

Note that you must follow exactly the recommended proportions for the preparation of any adhesives.

Recommended proportions, usually indicated by the manufacturer on the packaging, well, in the case of the paste of starch in most cases determined by eye.

When decorating the walls of the surface material of various kinds, of great importance is the choice of adhesive.It should be selected based on the characteristics of the material itself, as well as the condition of the substrate walls.

, in turn, should prepare properly before working surface of the walls.It must be clear from old coating, but other than that, remove all the dirt and dust.

Video:

If necessary, it is recommended to remove all the irregularities and defects that may occur later through a paper layer.

Also, it is imperative that at the base of the wall to put the primer, and then give it to dry thoroughly.

Just before you start work, you should tightly close all the windows and completely eliminate the formation of drafts, until such time as the base of the wall completely dry.