fiber cement

fiber cement material is used for the procurement of decorative panels.The composition comprises cement, cellulosic fibers and mineral additives.It is an environmentally friendly material, suitable for the manufacture of partitions, or protection of buildings.It features good resistance to mechanical stress, positively carries temperature changes, resistant to UV and frost.

Application

widely used raw material for preparation of plates, used as a building or finishing material.Due to the reinforced structure and light weight can be used to protect the walls of new buildings or old buildings.Fastening by means of brackets and the rails.Fiber cement panels can be used as a decorative material for giving structure presentable and stylish appearance.

plates may be of any size, from large to finish the siding of high-rise buildings to small panels for wall decoration.The surface material may be further processed, coated and have a laminated surface.Typically, boards have raised texture.Colours material depends on the additives used in the manufacture.Production runs using compression techniques or autoclaving.

Specifications fiber cement

Understand what is fiber cement than it is attractive to use, will help datasheet.The raw material has increased strength by including a mixture of cellulose and mineral supplements.Depending on the plate type and manufacturer, the technical characteristics of fiber cement may be the following:

• water absorption: about 8-14% in direct exposure to water;
• tensile strength longitudinal and transverse bending 25 MPa, 18 MPa;
• frost: 150 (the number of freeze / thaw cycles);
• coefficient of thermal expansion: about 0,008 (the minimum is subject to deformation);
• thermal conductivity of 0.22 W / m * K (provides little heat out);
• flammability: Class G1 (lit no more than 4);
• operating temperatures from -45 to +80 degrees.

fiber cement (FTP) boards do not have the operating restrictions in certain climatic conditions or regions.It differs a good steam-power, which eliminates the formation of condensation between the plates and the wall or insulated layer.

Features

positively distinguish its material properties.The absence of additions or reinforcement grids in the construction plates ensure a good bonding strength of particles in the process of autoclaving.The material is not affected by fungus or moldy.Rodents and pests are not afraid of the material so retains the original appearance and condition for a long time.Also important are the advantages of the material, as the ease of use, installation.For obvious disadvantage is the high cost of building new.

How is the installation of fiber-cement panels?

reviews can be found on the builders and owners, working on their own home improvement that fiber cement panels are installed very simply.

Wall, the decorated panels, cleaned and marked up under the arms.Running mounting brackets (projecting part must be not less than the thickness of the insulation layers).Held insulation of walls, installation of vapor barrier material (eg Izospan), installation of horizontal and vertical guides.Mountable ground ebb.Next, attach the vertical seam strips and plates of fiber cement themselves.

Detailed photo and video materials on the work described will help to hold the installation slabs and structure to give an attractive appearance without difficulty.In addition, should pay attention to fiber cement siding.Panels with such a structure is not inferior to the conventional siding on the original layout, and even surpass it in properties.It is an excellent replacement for the standard of finishing materials made of vinyl or wood.

Video