The alignment of the walls with his own hands

Perfectly smooth walls - a pledge excellent repair in the apartment.Even the most sophisticated and original solutions do not make your home the ideal, if the walls there are curves.The smoothness of the walls perfectly vertical angles and slopes create a sense of purity and constructive.On smooth surfaces, even an ordinary plaster looks great.

Before you start leveling concrete or other walls with his own hands (photo and video you can see directlyon this page), you should determine the vertical position and the current state of the surface.First you need to arm themselves with a plumb line that is attached to a nail driven into the wall or anchors.Plumb is near the wall, but does not touch it.This procedure is called staking.At the bottom of the walls is driven in the second dowel.Plumb thus should touch his cap.Then pull a cord between the dowels.Visually, then the state of the surface becomes at a glance.Staking is necessary to make each of the rooms.

Caulking

So, if the maximum deviation does not exceed 10 mm inconspicuous, it is possible to make the alignment of the walls with their hands plaster and putty.With high-quality work inside corners themselves turn out neat and beautiful, and the angles on the slopes and in the aisles it makes sense to strengthen the galvanized profiles, that will guarantee the highest strength.

Alignment Rotband walls or other such filler home with their own hands - a good option when it comes to the inner workings.Rotband the brand Knauf - gypsum putty is based.It is very susceptible to the damaging effects of the environment.However Rotband good because it is flexible and dries slowly, so this coating is extremely convenient in certain situations.

Plasterboard

If the deviation in the vertical tangible and visible, then the easiest way to align the walls - is to use plasterboard.However, this material is quite thick and heavily consumes space.Alignment of the old walls of plasterboard with their hands takes place in two ways.In the first case uses metal frames.Before the procedure done on a wall, vertical lines, perpendicular to it.These lines will be reference points for the frame.Next on the perimeter walls of the intermediate metal profiles are fixed, then the installation should be vertical profiles.Step selected in accordance with the length of sheets of drywall.Support profiles top and bottom profiles, firmly fixed to the established perimeter.For a more solid fixation between the supporting profiles can be arranged direct suspensions.For easy alignment between the extreme profiles stretched cord in several rows, which allows you to experience the wall plane.To reach the goal and get a perfectly flat wall, must be carefully and perfectly seal the joints between the sheets of plasterboard.For this specific mixture used.To avoid future occurrence of cracks at the joints can be used even reinforced PVC mesh, which is heated in a specially coated on the composition of the drywall.

Another way of leveling plasterboard - this alignment by means of adhesive mixtures.This method is appropriate when the vertical deviation of 20-30 mm.On the downside listovgipsokartona thick layer of applied adhesive mixture.Apply it in the middle and on the perimeter.Then the sheets are attached to the wall, carefully smoothed and leveled.Glutinous mixture dries quickly, so the work should be carried out at high speed.After installation, you should pay special attention to the joints.

Video align the walls with his own hands