Boiler indirect heating with their own hands

Ensuring a country house or villa with hot water is one of the main activities related to "life support" homes of all sizes and dimensions.

Its solution may be indirect heating boiler.

Unauthorized connection

Since the cost of industrial production models often "beats" the wallets of ordinary consumers, many of them prefer to collect indirect heating boiler with his hands.

you can use a gas cylinder used for its manufacture.

If you purchased a prefabricated unit in its assembly and installation should follow the instructions that came with the device.

In this connection indirect heating boiler comprises the following steps:

• installing the unit at the place of his permanent residence;
• Connecting pipes carrying water inlet and outlet;
• installation of the heating element, the connection "return flow" channel and a recirculating hot water;
• Connecting the hot water with the installation of the output accumulator of the pipeline;
• Connection temperature sensor with a circulating pump.Implementation of the grounding device installed.

very important point, important for those who are planning their own design and connect the indirect heating boiler - wiring diagram.

Photo:

are the following connectivity options:

• with the three-way valve and actuator types;
• using two pumps;
• with low loss header.

The first two options are used in homes with dual-heating system, and the third - is intended for use in homes with large amounts of water.

Video:

This indirect heating boiler piping kind of diagram is shown below, is quite complex, so just bring rational for its implementation of qualified and experienced plumber.

indirect heating boiler installation includes several basic steps:

1. coil connection to the heating system;
2. Installing pipes for cold water supply;
3. of cranes or wiring for supplying hot water to the consumer sources.

Structure and working principle

In essence, this heater is a tank, enclosed in a protective case with storage-type coil, which serves to move the coolant.

Between this layer of insulation is placed housing and tank, allows to maintain the water temperature in the tank at the desired level.

operating principle of indirect heating of the boiler is to use coolant from the boiler to heat the water accumulating in the container device.

Thus, the operation of this device, it is possible to ensure a full house or apartment with hot water without the use of additional energy sources.

Typically, the selection of the desired volume of the device is carried out from the personal preferences of consumers and the water consumption level in a single house.

for homes with multiple bathrooms is better to use indirect heating boiler of 200 liters, although usually an average family of 4 people lacking capacity of 100-150 liters.

Video:

Since devices of this type have slight differences between them relating to the characteristics of their installation and operation, choose the most suitable option for themselves can deal with the fact how the boiler of indirect heating.

Modern industry produces various types of water heaters, including horizontal and vertical, with a combined two-circuit and connection method.

horizontal boiler of indirect heating has a larger volume than its vertical analogue, which allows the use of this type of water heating devices in areas with large water consumption.

Turbofan boiler Indirect heating - versatile and easy to use, does not require the use of additional sources of energy to heat water.

In addition to this type of sale can also be seen combined boilers of indirect heating, the distinctive feature of which is the possibility of heating in different ways, using the energy of the solid fuel boilers, electricity and others.

selection rules

to ensure rapid heating of industrial water betterjust fit the boiler with indirect heating elektrotenom, among the advantages which can be mentioned the simplicity of its installation and the ability to ensure continuous hot water with minimal heat loss.

the most economical gas boiler can be called indirect heating, with a capacity of 4-6 kW, which allows him to bring water to the desired temperature faster electric counterparts, but it requires a special project.

connecting the storage heater of indirect heating, it is very important, along with its installation, set the security group that includes a special valve, which is located on the highway with cold water, and consisting of gear, safety and return valve.

Video:

more rational to use a stainless steel boiler of indirect heating.This material will provide better reliability and durability of the device.

What to choose manufacturer?

the construction market today can be found water-heating devices of domestic and foreign manufacturers, including Protherm, burning, etc. Baxi

Boiler indirect heating Proterm has reinforced inner layer of enamel, which, together with the tank and stainless steel coil, serves as additional protection against corrosion.

Can be used with boilers of different manufacturers.

Boiler ACV indirect heating due to their structural characteristics, practicality and functionality perfectly like both for residential as well as for industrial buildings with high levels of consumption.

Incidentally, it has a coil and has a double cladding type.

No less convenient and quality is indirect heating boiler Baxi, capable of operating with heating devices of various kinds.

Among the popular varieties may also include indirect heating boiler Drazice, as well as a "chassis" option as the boiler of indirect heating NIBE, featuring good thermal conductivity and cost.

wide variety of models and a wide range of different boilers Indirect heating

burning, representing a sample of the quality and reliability that can provide water for homes of different sizes, as well as industrial environments, etc.

Video:

Before choosing a boiler of indirect heating suitable model and brand, you need to calculate the size of the coming water consumption and the number of connected sanitary devices.Furthermore, it is necessary to take into account the volume capacity and installed in boiler house.

cost and options for the device purchase

Buy Indirect heating boiler can be in specialized stores, dealing with the implementation of plumbing and heating systems.

Currently, the price of the boiler of indirect heating is in the price range of 14 -165 thousand. Rubles, depending on the size and technical complexity of this instrument.

Buy indirect heating combined boiler can be branded centers of manufacturing companies, where a wide range of these products manufactured by leading companies, such as ACV, Bosch, Viessmann, Gorenje, etc., as well as on the websites of online shops offering heatingand sanitary devices, and accessories to them at affordable and attractive prices.