Connecting the water heater in the apartment and on a summer residence

Hot water is by far one of the prerequisites for the comfort of human life, and therefore it is very often the question arises, how to connect the water heater in the apartment or in a house in the country?

Currently, no hot water will not be able to live normally no family, however, even in apartment buildings quite often arise with its maintenance problems.

in the country or in a private home, this problem at all or does not solved and people have to go to various tricks.

Meanwhile, at the present time there are many ways to solve a problem with the hot water intake, for example, set in an apartment or in a house in the country with their own hands an electric heater storage type.

This device practically does not depend on the pumping stations and any external conditions, and for it to operate properly, it is sufficient only to competently carry out its installation and in accordance with the technology to perform eyeliner water and electricity.

This work is the presence near at hand all the necessary tools and materials is done with his own hands without any problems and in a short time.

main features water heaters

Today, in order to always be in the apartment or in thehouse in the country hot water, regardless of external conditions, offers several types of water heaters.

Quite often in case of problems with the hot water heaters set flow type.In this case, the device installation is carried out directly on the valve.

itself heater of this type consists of a special bulb, inside which the heating element is a heating element or coil.

Despite the fact that the water heater heats it running water, which is supplied from the pump station, it has some significant drawbacks.

First of all, these heaters consume a significant amount of electricity, which means that when used regularly will increase greatly for the rent account.

Besides, not every home wiring can cope with the power consumption of, and in some cases, a short circuit may occur at all.

most optimal choice for a private home or apartment is to install a water heater storage type.

These devices represent a metal tank made of a strong alloy, and wherein the desired heating water occurs.

Typically, such units as a heating element are the heating elements, which work can be established to regulate the relay.

Currently water heaters is most often found in houses and apartments.

These devices, simply install their own hands, in addition, the supply of water in them does not depend on the operation of the pumping station.

in favor of this type of water heater and says quite reasonable price, and the lack of any major requirements for electrical wiring.Mounting devices are fast enough.

About how to connect the water heater properly and quickly with their hands, talked in the video below.

Video:

Preparations

Before you install in your house or apartment water heater, regardless of its type, it is necessary to perform a number of conditions and to prepare the appropriate tool and the material.

First of all, you should carefully read the instructions, which necessarily comes with the device.

also advisable to study the general safety regulations that apply to all units working on electricity.

should still make sure that the water heater has been made freely available, not only when the installation is done, but also during the subsequent operation.

In addition, it should be properly defined and the wall on which it is intended to install an electric water heater.It should be free to support the weight of the unit.

is mandatory to check the condition of the wires, as well as all pipes and risers, through which water from the pumping station will be fed directly to the water heater.

important point is the preparation of all necessary consumables, as well as tools that may be needed in the process.

is mandatory at hand must be the punch with the appropriate nozzle, by means of which he will be the installation of the heater.

also to install the boiler with his hands, be required Roulette, various wrenches, including swing, pliers, and, of course, a set of screwdrivers with pliers.

must have sufficient electrical tape, tape fumku, and fine linen thread.

should buy a piece of reinforced plastic pipes, some hoses to carry out the necessary connections, tees, as well as shut-off valves.

For more information on how to connect the water heater in the home with their own hands, you can see in the video, which is available below.

Video:

Connection in

apartment in the very beginning of the work must be your own hands carefully mark the wall on which directly and will be installing a water heater storage type.

Then at a given height should be done with punch holes for mounting.

This is followed by the use of special anchors set the appropriate hooks, which is hinged device.

hooks should enter at a certain depth in the surface of the wall and rigidly fixed.Next to them hung the water heater itself.

At this stage it is necessary to check the tightness device and make sure that it is installed securely and reliably as possible.

In addition, the water heater should be exactly horizontal, which can be determined by means of the level.

Next, in accordance with the instructions to make a connection to the water heater storage-type water pipe system.

This is done using pre-prepared tubes of metal and flexible hoses.The hose from the pipe with cold water should bring to the pointer on the unit, which is marked in blue.

The next step is to connect the tap with hot water and access to the water heater, which is marked in red.

After that you should keep the water in the system and by opening all faucets to check the joints and joints for leaks.

should be noted that the water will pour from the tap only when all the accumulated air is completely out of the tank unit.

Next will only have to connect the water heater storage-type directly to electricity and check it in to heat.

Installation in a private house

owners of private homes are trying to use the storage devices designed to heat water more efficiently, and therefore it is very often carried out in conjunction with the installation of single-circuit boiler.

This connection storage device can be carried out by several different schemes.

So, wall storage units use the connection via a three-way channel.

This scheme involves the presence of an additional system expansion tank and circulation pump.

Video:

also often water heater in private homes are connected by a system of two pumps, the truth in this method of water heating is only switched off heating, which is not very convenient.

In addition, you can meet the storage unit to connect to multiple circuits or through the hydraulic manifold.

Each of the methods has both advantages and disadvantages, but in any case, the boiler operation is not dependent on the pumping station.

most often in a private house set cumulative device for heating water in conjunction with double-boiler.

In this case, the device itself is called an indirect boiler, and heating water in it is carried by the coolant from the common intake heating system.

In order to mount such system with their hands need to install a special coil at the outlet of the boiler itself to the place where the radiator is installed.

In turn, the chilled water will be discharged parallel to the heating system directly to the boiler input.

In addition, you must be a mandatory install on the system of the two shut-off valves, which will carry out the overlap of the heating system if necessary.

For more information about how to install a storage water heater, described in the video, which is available below.

Video:

In any case, before installing a heater for water storage type, you must carefully analyze the condition of the wiring and all plumbing pipes.

If there are serious comments better to completely replace all the faulty system to the new, which will ensure trouble-free operation for a long time.

For installation of the boiler it is recommended to use only high-quality consumables and accessories that allow the device to function normally for a long time.