Docking ( connection) with laminate flooring.Step by step instructions and video

Today is actively practiced by the use of different floor coverings, for repair, not only between different rooms, but also within the same premises.This combination gives a number of advantages:

• allows interesting design tricks and diversify the color scheme of the room;
• divides the room into several zones, depending on the destination;
• increases the service life of the flooring and facilitates the cleaning of the work area;
• enlarges the area of ​​the premises;
• reduces to cover expenses;

Most often, a combination of different types of coverage is found in the premises of the working destination, where the high probability of contamination of certain areas: kitchen, hallway, corridor.Ceramic tile is less prone to wear and more durable, but the price for it is much higher than on the soft laminate coating.With the interface, you can select only the most polluting parts and arrange a harmonious transition to the residential area.

Docking laminate tiles

Choice of connections depends on the level of contact with laminate tiles.

most easily make the transition between the coatings at different levels.For joint coverage applies tiered threshold or nut.

nut for joint tiered coverage

necessary to pay attention to the height of the threshold.It should not be too high, so it was not necessary for him to stumble, and self elevation did not spoil the aesthetics of the room.Thresholds are available in different colors.You can select a discreet color that will blend in with the colors of the two coatings.The most common plastic thresholds.

Wooden considered more elite, but only suitable for straight seams.In that case the seam does not form a straight line, the other type of profile is used: threshold curved having a property to bend.In the case when used at room special zoning runways, covering the joint and laminate tile is performed naturally.

docking methods laminate tiles

jointing coverings at the same level is much more difficult and requires a careful approach.There are several ways to organize the transition from tile to laminate flooring:

1. stykovanie, by a tight fit of materials;
2. connection using thresholds;
3. joint with a molding;
4. connection without thresholds;
5. junction compensator on a pith;

interface, without the use of additional materials requires precise fit perfectly material along the length, width and height to each other.This is a very hard and laborious work.customized materials can not be too tight.Tile and laminate - different in its properties to materials having the property of expanding under different temperature conditions.Ultimately, such a tight fit or cause swelling on the seam or joint places little further.To avoid this, the material is left between the small gap that is filled with a fugue, which dries requires constant adjustments and putty.Faces seam stripped to the point where no longer be felt by touch.This method though is cheap, but far from the most efficient and certainly not cost-effective in terms of future costs and the prospects for the spread of mold in the weld joints.

docking option laminate and tile

Another way to dock flooring, this compound them with a construction foam sealant or silicone.The use of these materials allows you to tidy unobtrusive seam.

can choose silicone, a suitable color to coatings.The main disadvantage of this method is that, if necessary, repair, disassemble the joint part will not - will have to disassemble everything along the seam.In addition, working with foam and sealants require some construction skills and accuracy of use.It is necessary to accurately calculate the right amount of foam, and try not to squeeze out the excess.The advantages it is necessary to include the high reliability of this method of joint compound and special aesthetics of the laminate and ceramic.

Connection interface by using cork expansion joint is a relatively new way to connect.This material allows you to make a durable and reliable joint.It provides a dense filling of the gap between the material and eliminates deformation, due to its ability to compress.Cork compensator is by far the best alternative to the nut.They can fill the gap of any width.Necessary seek shade using a special tinting and special follow-up care, this material is not required.The only drawback is the need of cork joint precise fit one floor to another in height and width, and therefore its use is impossible, even with slight variations in the fit.

best way of combining the elements

The most optimal way for today jointing flooring is the use of thresholds.Of the advantages of using this method it is possible to identify the following:

1. wide range of thresholds material.On sale there are sills made of aluminum, steel, wood, plastic and other materials.
2. availability of flexible thresholds, which provide connection to the wave-like joints;
3. camouflage properties.Nut will help to hide all the flaws of the work: bumps, bulges, splits.
4. simplicity and speed of installation;
5. a wide range of colors;

Photo clearance connections between tile and laminate

seam in a straight line can be easily connected straight bindings.In the case of the wave-like interface, you need a special type of sills.Typically, these objectives are best porozhki aluminum or plastic with rubber base.These sills easy to bend and allow the joint to close any complex deformation formy.Porozhki installed in an opening between the tile and laminate on the dowels or screws.It is necessary to think in advance about how to mount doorsteps.In some models, the mounting holes are provided in advance.The other has a secret attachment to a latch on the screw head protruding.

Lay laminate flooring should be on the tile to remain stock.

Next template is applied to the laminate on top of the tiles.Outline template outline.

excess laminate are cut along the contour with a pencil and mark the cut line on the tile.

tile is cut along the contour using a grinder with a diamond wheel.

When laying laminate flooring, you can use silicone, which provides stowage for leaks.Observe the dosage carefully to prevent blistering.Next is laying thresholds.

Step by step instructions for connecting the laminate and tile

After laying the necessary to sweep through the joint seam.cavity arisen by chance is to fill with silicone, which prevents the entry of dust into the seam.

By following these simple guidelines, you can ensure reliability and pleasing aesthetic appearance of your subfloor.

Video - docked laminate tiles