Self- adjusting door wardrobe , tips and the procedure works

Wardrobe is a convenient and multi-functional object of the interior of any apartment.This cabinet, taking up very little space when compared to conventional wardrobes, has a much greater storage capacity and ease of use.

It is natural that after some time after installation, you must make your hands and do some minor surgery to the cabinet does not bring you any trouble, while maintaining fully its convenience and functionality.In particular, this concerns the need to adjust his door, which should move freely and to maintain its original position.

Operations performed when adjusting the door

adjust the vertical

If you notice that they are not the side door edge is strictly vertical, you should eliminate this defect.

must first locate the bracket with a bolt, located near the bottom of the door in the place where the moving mechanisms.Turn the screw counter-clockwise, you raise the adjacent side of the door, if you twist it in the opposite direction, that thereby you omit it.For information know that each full rotation of the bolt is almost equivalent to one millimeter displacement of the door.

Adjusting abutment to the side rack

If the door is completely closed wardrobe, you notice that the door to the side of the rack adjacent loose, it should be to make adjustment of the horizontal stroke of the corresponding door.Next to the first bracket, which we just talked about, you need to find a second, which is most often mounted on the side of a vertical wall in the lower part or the middle of it.

Features available in some models

In some models, wardrobes adjustments are made somewhat differently.

If you have, for example, a case "Sterkh", then to adjust the door travel is necessary to find an arm attached to the castle gate, located on the sealing frame in the middle of the enclosure.

Although currently cabinets with rail swing doors are no longer available, it is possible that you in your life happen to meet them.In these cabinets stroke adjustment is made by adjusting the height of the track location (using its lifting or lowering).

This is important

You must understand that the position of the closet door depends on the degree of deterioration of the driving mechanism.If you want to ensure the long life of your wardrobe, but at least once every six months, you should make a full bulkhead rollers.To ensure the smooth progress must be applied to their mechanical grease or engine oil.If you do not, sooner or later, the mechanism fails.Replacing it is poured into a fairly complicated process due to the complexity of finding the necessary spare parts.