How to update the tiles in the bathroom

What you need to update the tile in the bathroom to

In order to begin work on updating the tile in the bathroom with their hands, you need to prepare a number of tools and materials:

• putty and a putty knife.
• Drill.
• hammer, chisel.
• Sandpaper №100.
• Means for cleaning tiles, acetone, vinegar.
• dust mask, gloves, goggles.

How to update the joints of tiles in the bathroom: an action plan

Work on updating the tile in the bathroom with their hands is composed of several turn-based events:

• The choice of tile updates.
• Update seams.
• Replacing old grout.
• Replacing a broken tile.
• painting tiles.
• Creating a decorative finish.

How to update the joints in the tile in the bath: step by step instructions.

Step 1: determining the methods to update the seams and appearance of tiles

tiles can be updated in several ways:

• Replacement of damaged parts of the tile.
• overlap other material.
• Update seams.

must select a way to update and get to work.

Step 2: how to update the joints between the tiles

update process welds can be made in different ways: with a marker, paint for joints or new grout.Carrying out work using the first two methods in its result will be temporary.If this method suits you, you can start to work.Before painting the seams with paint or marker should be washed thoroughly work surface.To enhance the cleansing effect it is necessary to make the processing of a stiff brush.Washing joints should produce water with a little vinegar.After washing and drying, you can start painting the seams between the tiles.

Step 3: update the seams with fresh grout

If flushing does not bring the desired result and the seams were stains and traces of mold, it is necessary to replace the grout seam.For this purpose, using scraper is necessary to remove at least half of the old suture.Then the remnants of putty and dust must be removed with a brush and wash the treated area thoroughly.After drying, should be applied to a new layer grout joints.

Step 4: replace damaged tiles

If on one of the tiles found small cracks, it is possible to replace it with another.This requires a hammer and chisel to separate the tiles from the wall.To avoid damage to neighboring tiles, it is necessary to make the drill a few holes around the crack for easier dismantling of tiles.

Step 5: How to update the tile in the bath using

paint on tiles possible application of paint.This can be a decorative pattern or a monotone painting.Before applying the paint to be cleaned surfaces treated with sandpaper №100 and treat with acetone.Following these steps, you can begin to paint application process.

Step 6: decorate the tile joints and to update the form

on tiled surfaces possible to apply a decorative finish.This is best to use plastic.Plastic is well suited for installation in the bathroom.

Thus, the article described the process of updating the tile in the bathroom.