Specifications Porileksa , its types and applications

Along with many polymeric materials of thermal insulation and sound absorption widely spread Porileks.Depending on the application, it is made of a different product configuration.Each of them has special characteristics and performance properties.In order to understand in all their diversity should carefully examine the technical parameters of each type porileksa.

What porileks: types and uses

porileksa manufacturing material - a polyethylene foam.During extrusion of a heated mass polyethylene impact foamers.This reaction leads to the separation material into small isolated cells filled with air.Further, using the extruder foamed mass impart the desired shape with certain geometric parameters.

Depending on the application porileks is divided into the following types:

• Insulation of floor surfaces.To do this, use products with a designation of IPPs.
• to create a heat insulating layer on the walls, attics and other interior applications used porileks brand IPPs LF.
• Thermal insulation of concrete structures in the conditions of winter operation is performed using the IPP EULA.
• Isolation seams and joints can be carried out using a non-harness.
• To keep the surface heating pipes and water pipe installed brand hollow tube T.

Some of these indicators may vary depending on product configuration and availability of additional protective materials.

IPPs

This substrate is made of polyethylene foam, the thickness of which can vary from 2 to 4 mm.Used as insulation of floors, it has good performance of heat resistance.

Besides backing reduces impact noise up to 20 dB at a thickness of 3.5 mm.The material is characterized by easy installation, improved performance flexibility.Cutting IPPs can be a simple clerical knife.When you select should pay attention to the size of the roll.Currently, you can select IPP area from 10 to 50 m².

IPPs EULA

This material is designed to protect concrete surfaces in winter.To ensure insulation of the substrate of polyethylene foam 10 mm thick coated with a layer of black polyethylene film (200 microns).

With such a multilayer structure and the elasticity of the material is able to withstand up to 10 cycles of use.The value of heat transfer resistance for him anyway 0.26 m² * K / W, which is more than a good indicator for a heat insulator.

IPPs harness

Bundles of polyethylene foam are designed for warmth and waterproofing of seams and joints in concrete and wooden structures.

depending on joint dimensions can select a product 30 to a diameter of 50 mm.The extreme flexibility of the material makes it possible to use it in isolation joints with varying geometric dimensions.Temperature range for this rather wide - from -40 to + 90 ° C.Subject to the rules of operation of the installation harness period is 10-12 years.

IPPs LF type C, A and B

When creating a thermal insulation layer with high reflective abilities are best used porileks brand LF.It is applied on top of a foamed polyethylene heat reflective material.

material on the surface of a layer of type C foil, which contributes 90% to the reflection of radiant heat.The other side has an adhesive base, which greatly simplifies the installation on vertical surfaces.It can be used for installation of underfloor heating, as well as internal insulation of walls.

If you need the Charter of heat-reflecting surface with enhanced energy efficiency, it is best to use PE-type (single-sided cover with foil) or B (two-sided).Depending on the parameters of insulation material can be chosen rolled thickness of 3 to 10 mm.

Technical characteristics of the above-described materials are very similar to each other.However, the difference is due to the type of construction or additional insulation (reflective) materials can significantly affect the choice of a particular model.