Heating water in the pool with their hands - equipment options and tips

This problem must be solved for another stage of project development.But if this was not done, there are a lot of different schemes and related equipment, with which you can arrange heating water in the pool is already built.Consider the features of the installation of various types of sets with their own hands, and what specifically to stop the election, the reader will be able to solve itself.

Note! Tutor designing equipment does not make sense for two reasons.Firstly, any error in the calculation is fraught with big problems, so the production of all "from scratch" requires special knowledge.Second, the sale has everything you need to heat the water, and the price, for example, simple solar collector is difficult to call a high (13 000 rubles).

Summary of technical devices for heating water in

pool heat pump

approximate cost of such a device is sufficient for a pool of 50 "cubes" - about 100 000 rubles.

principle of his work is shown in the diagram:

Pros:

• Installation and maintenance do not require the involvement of specialists.
• efficiency - high.
• CN / consumption - minimum.
• Compact equipment.
• rapid heating of the liquid.
• reliability.

Cons:

• Install only in a spacious room, as required quality blowing pump.
• high price of the device.

E / heater

instrument flow type.Equipment for swimming pools up to 45 - 50 cubic meters costs about 21,890 rubles.

heating element most devices - TEN, although some models are applied spiral devices.

Pros:

• Installation can be performed by any scheme.In the case of the acquisition of additional elements of process heating systems can be automated.
• Low cost of heating.

Cons:

• Durability depends on the quality of water (recommended to install a filter for the pool).
• connection complexity.In order not to overload the line, such devices "spread" over the phases.Therefore, it is necessary to provide power 220 / 3F.
• consume a lot of l / energy, so the operation (including current rates) is quite expensive.
• The safety plan requires attention.

Collectors

Flat

panel cost pool 30 cubic meters - about 22 000 rubles (its area - 5 m², unsupported).

Pros:

• Installation is possible on any basis.
• Care practically not required.

Cons:

• Heat losses - considerable.
• Repair - a complex and expensive.
• complete dependence on weather (natural light).

Vacuum

Price may vary in the range of 13 600 - 215 000 rubles.It depends on the number of tubes (the cost of one - about 890 rubles).

Such models collectors are considered more convenient to use.

Pros:

• heat loss - minor.
• inert with respect to changes in ambient temperature.
• Ability to self-repair.
• Efficiency - high.Water heating is ensured even in cloudy weather, the elements react and IF-radiation.

Cons:

• Installation is made at a certain angle (not less than 18 - 200).
• need for regular cleaning of the panel (for example, from the snow).
• complexity of system installation.
• device for all parameters being equal, the flat is more expensive counterpart.

exchanger

These devices - Class instantaneous water heaters water type.Price starts from 11,000 rubles.

necessary for their functioning heat source that circulates and supplies (via a pump) into the hot water circuit 1st.This can be a boiler included in the building heating system and a separate heat source, only work on the swimming pool heat exchanger.

Pros:

• Small dimensions.
• Simple installation and maintenance.

Cons:

• inertia.The water is heated to the desired temperature is produced for a long time.
• price of equipment for heating swimming pools, taking into account the volume of the reservoir, is fairly high.For 50 m³ is 45 000 rubles.
• An external (working) the source of thermal energy in the form of a boiler or another.This increases the cost of operation of the system, as will have to "drive" is practically idle, only for heating the pool in the summer heat source.

What to consider when choosing equipment for heating water

• water in open water cools faster than closed.Therefore, all being equal, in the first case the equipment capacity should be greater.
• is believed that the water temperature in the range of +24 (± 1) ° C for bathing is the most comfortable.