Build Daily

Интерьер

August 12, 2017 18:05

What is better to choose a kitchen set , MDF or plastic - the answers

click fraud protection

Trio_agata in furniture stores customers primarily pay attention to the facade of the kitchen units, immediately assessing how it will "look" in the house.After the front panel on the definition of "person" cuisine, and their external design directly depends on the overall design of the room, as it is - the most massive, immediately conspicuous element of the situation.

But from what made the components of the headset - it is the practical side of things.One of the most discussed issues at various forums for the comparison of the two materials kitchen - MDF and plastic.So it is better to choose?

clear answer in this formulation of the question can not be, in principle, since we are talking about a few different things.MDF - is the foundation from which made structural elements (doors, shelves, drawers).These "details" cuisine cut to required size (collected) from wood-fiber plates.But plastic - not that other, as a coating (cladding).

confusion comes from the fact that they are generally decorated facades of chipboard, therefore correct to compare when assessing budget options Kitchen is the material with MDF, given that such plates are covered by a film.

Best quality, long lasting, but also expensive headsets - from natural wood.But their value is greatly limits the range of potential buyers.For a cheap (and affordable) cuisine using materials synthetic origin.To answer the question in the title of the article became clearer, it is worth to clarify a number of points.And at the same time to understand what constitutes such plates.

VNITI




What to consider

First , headsets will be used in what circumstances?Any kitchen - it's the humidity (often excessive), and the temperature drops (sometimes quite substantial).Someone installed a good extractor fan (how to do it - read here);someone has a large kitchen, where conditions are more comfortable;one advantage of this location is often, and plate for the day included, and the other - periodically, mostly in the mornings and evenings.

Second , orderly owners themselves.It can literally ruin everything if you treat things very casually.At one set can stay without any problems and 15 years - 20, and the other a year later would complain that they have been deceived and sold marriage.Therefore, focus on the reviews alone is unlikely to be correct.

Third , who is the manufacturer?If the technology of production is observed, all the modes are kept exactly the big difference from what is collected kitchen (MDF or particle board), no.Why?

Features materials

MDF

raw material is wood dust.It is mixed with an adhesive composition, and the resulting mass is pressed at high temperature and pressure.A top film is covered by the resulting material polyvinylchloride (PVC), which is also glued under pressure.

chipboard

Their basis - sawdust and chips.Otherwise there is no difference, except that instead of the plastic film is glued.

dsp_vs_mdf

What is the difference?As used smaller fractions, these plates a few denser and therefore stronger for MDF production.That is why they are not covered with plastic, which is used in the manufacture of particle board for improving the strength.But it's worth noting that the plastic (if substandard products) in high temperature conditions may produce harmful fumes.

What to look for when choosing a kitchen

  1. material thickness.Minimum standards: chipboard (with plastic) - 18 mm MDF (with film) - 16 mm.And it should be on both sides.
  1. Edge of doors, drawers and the like.In these places - the film edges, so they are considered to be the most problematic.That's it and you need to examine more closely.
  1. conditions at the place of accommodation.The film is not "love" the systematic exposure to vapors.Excessive exposure to humidity and temperature, it begins to "warp" appear peeling.By the way, if permanently switched oven gas stove, you have to push boxes or plow door adjacent compartments.
  1. options mount-on parts.As already noted, particle board - the material is less dense, so when choosing a kitchen model it is necessary to pay attention to the quality of the installation of fasteners.And use the suite would have more accurately.
  1. manufacturer.Since we are talking about the acquisition of finished dishes, the interiors can meet a variety of options, both imported and domestic.If we are talking about an inexpensive headset, it is better to buy local product manufacturer.Now in almost every village has a furniture shop.Why is "his" preferred?

In life anything can happen - inadvertently, or for some other reason, something may be damaged (is cut, scratched, split).What to do?If the kitchen is made in this town, then go to the production and to agree to make a new door (drawer, shelf) on specific work does not make size.debate about what is better to set "from MDF or plastic," will not end ever -

summarize, only one conclusion can be made.

Each of us has their own preferences, own kitchen, their attitude to things.The article presents a brief analysis of all the reviews that are found on the different kitchen sets.And what exactly to choose - the thoughtful reader decides himself.

instagram viewer