Build Daily

Equipment And Tools

August 12, 2017 18:07

Mechanical plaster - we master construction equipment

click fraud protection

Mechanical plaster - walls are amazingly smooth

Imagine that you need to plaster the walls of 200 square meters, which, in essence, gives us a standard one-bedroom apartment.So can 50 squares of the ceiling here to add.Presented?Fearfully?So, all of this abyss of work you can do this manually, that way a week and a half, or a couple of days to carry out the same amount of finish, but only with the help of special equipment.Mechanical plaster surfaces is performed with the help of two very different units - a plaster station and kartushny gun with a compressor.Two different variants of giving the same results - namely, a completely smooth walls, with an extremely durable layer of plaster.

Plaster station is a standalone system, which is mixed solution is then supplied with a high pressure hose into the socket "pistol", where a mixture of powerful jet crashes, dense layer covering the wall.In order to give effect to the station, enough to fill the hopper dry mixture, pour the water back and run the compressor motor, which is part of the unit.Everything is just hard to keep in the hands of a gun, vaguely reminiscent of a fire hose, directing the mixture to the wall at an angle of 90 degrees to the surface.That is, the whole process is fully automated.

Kartushny gun - a semi-automatic, because you have to knead the mixture by hand and the finished composition poured into the tank at the top of the gun.After refueling, the gun is ready for action, we can only switch on the compressor, coupled with the technical means by means of a high-pressure hose.Hold the gun with a full tank falls in the hands, so the utmost ease the use of this unit is no different.

Mechanical plastering by aiming the spray mixture

The process of applying plaster with a special station or kartushnogo gun starts as it is upsetting for someone to work with his hands.After the wall it is necessary to prepare to finish.Thus, surface cleaning, priming, installation of special plaster profiles on the edges of doors and windows and outside corners, if necessary - exposure level on beacons.

In places where different materials are joined, is the first layer of plaster sink metal mesh, in order to avoid the appearance of cracks.

And then, finally, the preparatory work is finished, starts shooting at targets, that is, the mechanical application of plaster.It is preferable to use a plaster solution.Of course, it solidifies rather quickly, but the bins are emptied both units 20-30 minutes.Yes, and it is impossible to keep longer kartushny gun with five-liter capacity, albeit gradually emptying.Click on Start, point the jet on the wall and enjoy the process.

Mechanical plaster walls - the pursuit of perfection

The trick when working with plaster station and kartushnym gun - to keep the guide funnel, from which sees the jet solution is strictly perpendicular to the wall and at the same distance from it while continuing mechanized plasterwalls.As far barrel "gun" is to be away from the wall, it depends only on the compressor capacity and thus the power of the jet mixture.When properly defined distance and direction of the socket plaster almost sprayed and lies flat on the wall layer, without leaving ugly smudges and streaks.plaster layer thickness should not be less than two centimeters, especially for uneven walls.

plaster mechanically extremely simple, you just continuously lead the line solution along the entire length of the wall or you want to cover in a day, and then slightly moving the barrel below to start a new line so that it overlaps the first half.So you'll get the lack of joints between the rows of the coating and a certain smoothness of the walls.Do not forget that in the event that carried out the plaster on the beacons, they should be completely hidden under a layer of solution.After the last row is performed, the surface is sufficient to align the H-shaped rule, and after the finish drying to bring to full smoothness already trapezoidal rule.And the dry layer must so as not to rip off its surface is not scraping the road rules, and slightly crumbling.

In fact, automated plaster not only saves power, but also the time and financial resources.Firstly, the distribution of plaster under the pressure steady stream over the surface of the wall allows you to not be distracted by scooping permanent solution, as is the case for manual finishing.And the wall is covered with a solution quickly.Moreover, for mechanical finishing cheaper mixture of the same composition but for manual operation.

instagram viewer

Categories

Latest Blog Post