Facade of granite - greatness in simplicity

The characteristic facades of granite?

principle of operation of such a simple facade.air flows swirling in the gap between the insulator and the shield, the excess moisture was removed, and the walls are released as condensate formed.With this inside the building creates healthy climate with optimal moisture regime, and the very walls and thermal insulator protected from rotting in the summer and freezing in winter.

relatively recently become extremely popular in the Russian market for many years, granite has been successfully applied in European countries, where granite facades facing increasingly rare because of its high cost and limited resources.New artificial lining material in little inferior to the natural one, and according to some indicators and surpasses it.

facade of granite - what qualities to wait in this case?

as used as a decorative coating to commercially available stoneware ceramic tiles obtained by pressing under high pressure, followed by firing several types of clay with different physico-chemical parameters.

strength of the resulting material processing many times greater than the strength of concrete, and it allows the use of fire for granite finish saunas, stoves and fireplaces.Its unprecedented rigidity and durability, making the tiles deformation virtually impossible.

resistance to chemical compounds (with the exception of hydrofluoric acid) allows the use of granite in environments with a high content of aggressive substances.Made of natural components tile is environmentally clean and even with the strong heating does not emit harmful substances.

It is moisture resistant and hygienic, does not fade when exposed to direct sunlight and does not accumulate electric charge.Almost every natural stone inevitably has the radioactive background, this sin and granite facades.However, the respective measurements of its artificial analogue background instruments are not recorded.

From the foregoing, it follows that in the lining installation granite facade fits perfectly, but it can not be recommended for laying the floor, as a result of increased friction of sand the tile surface loses its polishing, and in contact with water it becomes extremely slippery.

Installation of the facade of granite - the sequence of work

Facade finishing granite building provides high resistance to temperature extremes outside and exposed to rain.Due to the fact that the façade is composed of several structural elements with different characteristics, the structure provided an excellent sound insulation.

In hot weather, a large part of the heat absorbed by the liner, is removed from the walls of the structure of the circulating air flow in the gap, which positively affects the microclimate inside the building.But it is necessary to go directly to the characteristics of the installation.And the first important fact should be pointed out that fixing units facade granite buildings are made of galvanized brackets and vertical profiles.

Installation of granite facade can be carried out without prior leveling walls and removal of minor defects on them.The first phase - the installation and layout of pendulums, which are mounted on the vertical profiles and brackets.bracket design allows the leveling profiles relative to the surface of the wall.Fixing their anchors made resistant to corrosion.

is followed by the installation of insulation from the bottom up, with the insulating material plates must fit tightly to each other.Plates are attached by special dowels.At the next stage the rivets attaching vertical profiles to the brackets in such a way that between the insulation and paneling remained gap.

At the final stage, the design of stoneware tiles lining.For the solution of the remaining questions can contact our Media section, which clearly shows facade cladding granite videos, clarity in this matter would not be superfluous.