Decorating joints gluing ceiling moldings

When pasted wallpaper and decorated ceiling, there is a need to decorate the joint line between them, and the question arises: how to glue the ceiling moldings?

decorative ceiling moldings - a band with an embossed pattern.

It is also called a baguette, a frieze or fillet.

fact plinth serves as a visual association area of ​​the walls and ceiling into a single unit.In older homes it function performs plaster moldings.

With its operation encountered many problems - she quickly lost its color, and it was often her whiten.

When chipping a piece of stucco, the whole bridge between the wall and ceiling, lost look.

stucco was difficult to replace with your own hands, as it was required to carry out the work, which would strongly contaminated interior.

course to restore stucco tried to apply the putty, but the result was not always successful and require skill.

Not so long ago to replace the plaster moldings come easier in the paper version.The line of intersection of the walls and the ceiling papered infill -. paper strip width of 1 to 5 cm

Although the design, which was created by gluing it was questionable, but the other options were not visually align the joint.

With strong Elevations panel wound from the bottom up, and rather emphasized unevenness, instead of hiding it.Even in modern houses with smooth walls to glue a panel is not always possible.

example, suspended ceiling in conjunction with a panel will lose its design.In recent decades, finishing works are made with modern decorative moldings.

It applies to any surface of the ceiling, whether plasterboard, a tension or a ceiling with wallpaper.Consider how you can glue the baguette with his own hands and offer to see an instructional video.

Photo:

Preparations

In order to choose the right ceiling moldings, find out the differences between the two most popular materials for its manufacture - foam and polyurethane.

Baguettes foam lighter in weight, which makes the installation convenient.They are much cheaper than polyurethane.

However, fillet of polyurethane can be used in rooms with high humidity, such as in the bathroom where the foam moldings would quickly lost color.

If the room there is a large difference between the height of the walls, the sticky foam is also difficult - brittle material may crack.

But polyurethane flexibility in this case, can be very useful.

Therefore, the choice of material for decorative ceiling is better to make the basis of the technical specifications and financial capabilities.

The next step is to purchase a plinth is a measure of the room.Standard length

skirting strip, regardless of which it is made - of polyurethane foam or - is 2 meters.

to measure the length of each side and divide it by 2, an integer - a whole number of bands, and subtract the remainder of the division by 2 and write the resulting number.This band, from which the surplus will remain.

If it is not too small, we can apply it on the other wall.Thus, the need to first wall strips obtained integer plus one.

When calculating the amount of the baseboards to the next wall, take into account the available balance.

This counting scheme will help to minimize residues and, accordingly, the financial costs of repair.

's define the width of the fillet.Required to be taken into account - it is the difference in vertical drop.In fact, it is necessary to close the fillet.

necessary to take into account the height of the walls - the larger it is, the greater ceiling moldings say.Wide quirk low ceilings will visually reduce the height of the room.

When the standard height of the walls and the slight difference in height would be best to look ceiling moldings 3-5 cm.

height If the wallpaper are bright and large image, you should take a white ceiling moldings.Solid walls decorate colored carved baguette.

for ceiling moldings Glue actually do with their hands from the materials left over after repairs.Take 1 part water, add any finishing putty in the same volume and fill ¼ of PVA glue.

thoroughly mixed, remove the resulting lumps and leave it for a short time.Before use, the solution should still stir again.

Video:

This mixture can be used as the adhesive mass and the grout between the bands ceiling moldings.

purchasing ready glue, pay attention to the instructions.Cheap polymeric compositions completely inappropriate for ceiling moldings.

They can be glued surface quality, but the time of fixation is too long.

Because you have to be glued on top, hold pressed state strip 2 meters long is very difficult.

Acrylic option allows you to glue baseboards in living rooms, but the fillet in the bathroom have to be glued using polyurethane composition.

justify the use of polyurethane, if will fix a ceiling plinth for suspended ceilings.

glue ceiling moldings

Technology gluing is shown in the video.To pokleit ceiling moldings, need to apply adhesive on its back side and press to the corner between the wall and the ceiling.

complexity present in two points - in the application of glue on the plinth and in the corners of the design.Let us consider these points in more detail.When applied it is important to avoid excess glue is required.

adhesive weight, tread on the wallpaper, can not be removed without a trace.Therefore, in order not to spoil the wallpaper, you need to apply a layer of glue, which would be sufficient to secure the plinth.

If you use glue in the box, the overpressure gun, you can easily squeeze his right amount.

Video:

If you will be glued using a formulation made with your own hands, take a brush, suitable for baguette width.

How can you make sure that you have done to a sufficient amount of adhesive mass, but without excess?

Turn the baseboard face up and hold for several seconds.If the glue does not drip started, it would be enough.

There are two choices when glued baguette - before wallpapering or after.

If the walls are perfectly aligned at the top, or you are using a polyurethane, then it makes no difference what kind of workflow choose.

When uneven walls using foam or better to glue the plinth, then pokleit wallpaper, which are cut to the level of baguette.

way, it will not change the ceiling moldings on the next repair.

Gluing baguette possible simultaneously to wallpaper on the wall and ceiling.But if implemented stretch ceiling, the sticky fillets made solely on the wallpaper.

best to glue the first fillet on the corners.Much of the complexity of interfacing of baguettes at the corners.To carry out its required miter box for cutting angles direction.

Place the plinth in the unit and cut at an angle of 45 C. It is important to first dock the corners, and then align the yardage, cutting the opposite side of the baguette.

sure that the corners strictly maintain the slope of 45 C. This process can take a look at the video.

Video:

If there is a need to hide under a ceiling plinth wiring, then fix it without sagging in the corner between the wall and the ceiling before pokleit first fillet.

correctly the first fillet glue on the corners.When all four corners of the left and right fade ceiling moldings, it is possible to glue remaining.

Their trimming if necessary we will carry out already at a right angle, that is not difficult.

If an error was made when fixing the skirting strips (for example, on the one hand, he stuck to the ceiling without a fit), it is necessary to separate it as soon as possible, until they froze the glue.

special care so that the ends of the skirting boards are securely glued.Deficiencies and inaccuracies will be removed at the stage of finishing work.

Finishing work

When turned to glue all the skirting strip, and they are already dry, you can begin to disguise the seams between adjacent fillets.It will consist of fillers and coloring.

If the walls and ceiling are ready, then you need to protect them from falling into working solutions broad strip of paper, which should be recorded, for example, safe needles.

The gap between the skirting laying putty solution and remove excess small plastic spatula.Putty is necessary and possible gaps between the fillet, walls and ceiling.

We give a solution to dry during the day and proceed to the grout, which will produce a skin fines.

Video:

As a result, properly conducted putty walls, prints and ceiling will look unified design.Furnish can stop here.

But if a white plinth, then there is a reason to paint it, it will keep fresh color.

The painting is permitted to produce and later, especially if the seams practically used putty.

significant layer of putty solution requires fixing the paint to prevent it from peeling due to heat premises.

finishing discussed subtleties enable you to carry out the selection of fillets and glue baguettes with their hands under any technical conditions without any problems.