Install blinds without masters and costs

Selection of blinds and material

blinds on the Status of Species bars:

• vertical;
• horizontal.

Species blinds Materials:

• aluminum;
• plastic;
• wood;
• bamboo;
• tissue.

choosing blinds, should take into account, first of all, the design of the room.For rooms with curtains and curtains is best to set the vertical or horizontal blinds.Fabric blinds are preferred to create an elegant interior design and used independently.In an embodiment of applicable modern style wood and bamboo.The main thing that they are thematically fit into the interior of your home.

Their main function: protection from the sun, air ostuzhennoy, protecting furniture from fading due to direct sunlight.

Installation of horizontal blinds: guide for the self-taught.Measurements

Jalousie windows will look appropriate and harmoniously only if their size will match the size of the window.So measurements - the most important step that you must perform before the acquisition of the window device.

measured the width from the left corner and the bead to the right corner and glazing beads.Also, from the top to the bottom bead.The length should be equal to the distance from the beginning of the upper bead to the lower bead.

methods of fastening shutters

There are two ways to install:

1. mounting bead.It requires great care, especially when choosing screws as choosing the wrong length for the screw, you can scratch the glass, and it can reduce the insulation and sealing properties to the glazing unit.

1. mounting profile.After installation, it is difficult to replace if broken.

to use blinds in the corner of the room you need to choose a model with a fixed bottom, or with strong ventilation pomnutsya and they change their appearance.

Assembly blinds

Take the screwdriver handle screwdriver.At the site, where they will be in the upper mounting blinds, put a mark for screwing screws.This will avoid inaccuracies and the need for error correction.Note the place with a bracket attached to the intended location, and screw the screw.When you need to fix the clips to the bottom of the blinds and put on the brackets.Check how entrenched design and can now further work.

Fabric blinds to install

The mounting brackets are also used, but in this situation they sit down on the adhesive.In fact, the blinds glue on the profile.Fabric blinds are fixed at the bottom.How to mount the horizontal plastic, fabric and aluminum products can be viewed on video.

mount vertical blinds: a brief guide.How to build vertical blinds

By twisting grooves running rollers inside collect fabric vertical blinds Way.Next, place the slats in the rollers before they click.Then placed in the lower part of the small lamellae weights which are regulated by a chain.Cornice is ready for mounting decorative panels.

Method 1: Set the blinds to the ceiling area and slopes

This type of installation is realized by screwing screws into the slopes.Take the ledge and attach it to the window in order to make a mark mounting passages.Then punch punch holes in the ground and put the dowels.Try not to touch the hammer slopes, or the wall can crack and break away.After screwing dowels to them apply the cornice, which is fixed with screws.

Method 2: mounting on brackets, fixed wall

The second method is based on the joining brackets to the wall, and then putting on him the eaves.To do this, take the bracket is applied to the window opening, measured the installation site.Then drill a hole screwdriver, thread the dowels and attach the bracket with screws, and put it on the ledge.

How to reduce the width of the blinds

Reducing the width of the blinds happens on several principles:

1. Place the product horizontal on a flat surface and put down the parameters for cutting.Carefully cut hacksaw cornice and rails, so as not to damage the coating.
2. Reduce horizontal blinds can be at their height.First remove the ledge and cord.Remove slats to size and replace the lower ledge, and the excess lace can be cut.In the following video you can learn how to reduce the height shutters.
3. Vertical blinds are cut directly with scissors or a hacksaw to the desired height.In turn moves to mount the new length.

vividly about the installation can be found in the video.

In conclusion, we wish you good luck and be careful!