Facing bricks - facing the main nuances

Facing brick facades - it's worth venturing?

In addition to protecting the walls of the building from the harmful effects of the environment, facing brick facades helps to maintain the recommended temperature and humidity conditions in the room.It is very important for the apartments, which are air-tight windows.To fulfill these conditions facing facade brick house must be made so that the gap between the wall of the building and most facing was not less than 3 cm.

Only in this case the gap is ventilated airflow sufficient force required to release excess moisture in the atmosphere.The undoubted advantage that gives decoration of facades with brick, and is improved sound insulation.And if the gap between the wall and facing the minimum to put an additional layer of soundproofing material, the effect will be excellent.

Facing bricks - select material for his house

for wall cladding is applied facing brick facade (or front clinker), presented at the Russian construction market a wide palette of colors and variety of forms.But avoiding difficulties at work, you can find an easier way to use the entire panel instead Piece brick, but more on that below.Depending on the quality and cost of clinker brick facade is divided into groups of "elite", "standard" and "economy".

It is made from special types of clay and is considered to be the most durable of the bricks produced by industry.Noteworthy is its ability to repel water, which is very important for the cladding material.facade cladding - it is nothing like laying brick facade on a common wall with the carrier base.The width of the foundation is calculated so that it can simultaneously serve as a base for supporting the wall and a facing wall for ensuring the necessary clearance.

Finishing facade under a brick - especially construction work

Facing the facade of the building can be carried out simultaneously with the construction of load-bearing walls, and maybe after their completion.In any case, facing the wall securely fastened to the carrier laying a certain number of rigid links.They can be made of fiberglass, basalt or metal (perforated strip of galvanized metal, stainless steel nails or spiral).

use of basalt and glass fiber connections are attracted by the fact that they are resistant to corrosion and does not constitute "thermal bridges".In addition, the basalt is also resistant to aggressive media and for concrete masonry mortar.

Basalt communication - the core of a diameter of 0.4 cm with a sand-coated on both sides to ensure good adhesion to the solution.One end is mounted in a vertical bearing wall seam, and another - a facing horizontally.stem length must correspond to the total thickness of the ventilated gap and depth mounting in walls.

In the application layer insulation material and its thickness is taken into account.Incidentally, the thickness of the thermal insulator should be taken into account when calculating the thickness foundation.For reliable fastening to the supporting wall facing per 1 m2 is used as at least four links.

The above method of lining reliable and efficient, but it requires substantial capital investment and strict observance of technology - otherwise the possible effect opposite to the expected.However, there is a method for lining in which the brick facade decoration can be performed with much less labor and cost money.

More recently, in our construction market appeared facade cladding panels under a brick , which may be mounted directly on the load-bearing walls.The panel consists of a polyurethane foam glued to it with clinker tiles.With unrivaled thermal insulation characteristics of a wall lined with a panel does not outwardly different from the clinker masonry facade.