Build Daily

Country House

August 12, 2017 18:07

Sewerage system in the country with their own hands

click fraud protection

sewerage scheme villa with their own hands

Driving sewage villa with their own hands

design and installation of this type of communication can provide specially trained workers who do everything by yourself.But such a method of providing water output can fly to the owner in a round sum.Therefore, the concept of "drainage in the country with their own hands" is widespread among the owners of suburban areas and outbuildings.

Before any kind of installation it is important to create a plan for future activities.In this case, the sewer communications scheme.This drawing will be the support element in the design work, the calculation of the required number of fittings and other installation materials, as well as in-line help to avoid errors during operation.The scheme should take into account such aspects:

  • An arrangement possible water drainage points inside the house (sinks, tubs, toilets).
  • The structure of drainage indoor communications.
  • place, as well as the technical features of the point of bringing out the communication system.
  • structure of the pipeline outside (outer) sewerage network.
  • Select the type and technical characteristics of the cleaning manifold assembly (drain pit, septic tank, bioochistitelnaya station).

Thus, before starting work on the owner of the infield will be armed with a detailed diagram that describes the structure of the upcoming stages of work, type of materials needed, and also provides for the installation and the nature of their combination.After creating a work plan the concept of "drainage in the country with their own hands" will find a thoughtful and structured.

Driving sewage villa with their own hands

Specificity mounting external and internal sewage systems

cottage to ensure quality and reliable drainage system in the country is necessary to create two types of drainage structures.These types are described as outer and inner drainage structure.Each of these types has its own specific characteristics and operation of the installation.Traditionally, the primary importance is the formation of the internal structure of drainage, which includes the following aspects:

  • Please make installation a "small" items such as sinks and bathrooms.This type of device does not have a very large volume of water allocated and stiffness.Therefore, the diameter of the pipes used in the disqualification of the used water from sinks and baths, you can take no more than 50 mm.
  • larger pipe diameter (100 mm) must be used during installation of the sanitary element as a toilet.A larger diameter is caused by the nature of wastewater, which are moving away from the toilet.
  • above pipes are connected to each other, and then goes into the drainage system tail pipes, the diameter of which must also be at least 100 mm.It is the final element of internal sewerage system and displays the waste water out through the hole in the basement or in the wall, which must match the diameter of the pipe.

Specificity of mounting external and internal sewerage system in the country

Sewerage in the country with their own hands in their structure finishing devices unit has an external drainage system.This system has the specific features of the installation:

  • Drainage pipes must be laid at a slant, which shall not be less than 25 mm per linear meter.This pipe laying communications system will provide a smooth flow of water in the right direction.
  • Laying produced in premature dug trenches depth of about a meter.

When designing a trench system should take into account the fact that too much pressure could damage the pipe.Therefore, a lining is not necessary to carry out at places of possible movement of people or vehicles.Also falling asleep sewer pipe ground should be selected from any of her stones, it will significantly reduce the pressure on its lining and will minimize the risk of mechanical damage.

  • endpoint of external sewer system is a sewer, which fall into the drainage water.

Specificity of mounting external and internal sewerage system in the country

types sewers

Sewerage own hands completed the most difficult and time-consuming element in the creation, which is called the sewer.This device can be of three types: biological treatment plant, septic tank and drain hole.

  • biological treatment plant is the most modern device that will serve as a sewage collector in the sewer system in the country.This can be said to "device" has a high degree of purification and has high environmental factor.The downside is the high cost of the system and the need for electricity costs for its operation.But, in the end, all cash costs overrides the functionality of the device.
  • Septic, in fact, is a two-chamber drain hole in which cleaning of drainage water in two stages.The downside is the high level of labor costs for the installation of such a device.
  • drain hole.It is a pit inside lined with bricks or cinder blocks.It has the lowest level of treatment, but also imply lower costs of labor and human resources.

Types sewers

Thus, in the article have been described and characterized all aspects of the concept of "Sewerage their own hands."All information is useful in any household gardeners.

instagram viewer