Pumps for pumping sewage

sewerage system without disruption

To sewage system does not give any failures, you need to follow the only condition: to provide a constant, albeit a small bias towards the pipe arrangement for removing waste water.It should also avoid turning pipes 90 degrees, because such rotations will contribute to rapid clogging and difficulty in cleaning activities.

In addition, you need to have at your fingertips the pump required to pump sewage.Choose the right equipment will help get rid of many problems associated with sewage contamination.

What pumps are used to pump sewage?

There are two types of pumps for pumping water, which depend on their pollution:

• fecal;
• drainage.

These two systems are often confused, but there is a difference in their functions and design features.Submersible pumps will be needed in the case when it is necessary to pump liquid from the dishwasher or washing machine, which came to the basement or the sump.This equipment is ideal for pumping liquids with a minimum of small solid particles.There are advanced models of sewage pumps, which are equipped with a device, contributing to grinding waste.By the impeller, equipped with cutting edge or knife, the pump will be sufficient to cope with solid waste.

consider in more detail the main varieties of pumps for pumping faeces.

Species sewage pumps

There are four groups of devices, the purpose of which - pumping sewage.This classification is based on the presence or absence of a mechanism for grinding, water temperature for pumping, the method of installation.

first type of pump that does not have a shredder, suitable for pumping cold water.This type of equipment is considered to be one of the cheapest phones in this category.Its purpose - pumping of clean water or liquid pool.For correct operation of this device is important the temperature sinks - no more than 40 degrees.

second type of pump, in a structure which is not provided for shredder is suitable for pumping hot wastewater.That is, through this unit can handle the pumping of contaminated fluid, heated up to 90 degrees.Often used this equipment in the baths and saunas.

pump is equipped with a shredder and designed for pumping cold sinks - the most common type of equipment.Its main feature is that it can easily cope with the consistency of the toilet.He is able to peredrobit trapped in water hygiene, hair, feces and pumped it all together with the dirty water.This pump will quality work if you stick to it thermal characteristics - fluid temperature must not be more than 40 degrees.

second type of pump is equipped with a shredder, used to remove hot waste water.Its ability to raise the sewage at a temperature of 90 degrees, allows to use it for baths equipped with a toilet.This unit is able to rid the bath holder from clogging the sewage system.

Choosing a pump for sewage

When selecting a pump should pay attention to the following quality parameters: material power, cooling method, the maximum pressure.

So the material.Be sure to take into account the corrosion of its quality, because the pump will operate in a hostile environment.It is suitable stainless steel devices, plastic or cast iron.

from the power unit hardware performance will directly depend.However, not necessarily powerful unit will show the performance.Household pumps for one hour, 5 can deflate cube.water, this is enough.There is equipment that for the same period of time can pump five times more liquid.Therefore, choosing the unit capacity, should take into account the volume of the pit, for which it will be applied.

Typically, the pump head is the standard - 10 m, that is, the device can lift the liquid to a height of 10 meters.Many manufacturers practice manufacturing pumps with less pressure.

Regarding such a parameter as the cooling method, it is advisable to select those models, the cooling system which is based on oil.Such equipment is more reliable due to the effectiveness of this method of cooling.