Lacquered parquet , or how to make a perfectly smooth floor ?

How varnished parquet?

Surely you thought about the question - how to varnished parquet? And what methods are there?The best way - his own application using a roller, brush, swab, spatula.Varnished floor immediately after, as embodied and Scratching of parquet sanding.On the surface, there should be no traces of mastic and other substances.

start with the far corner of the room.It is important to observe clear guidelines varnish manufacturer.Each composition painted its shelf life, terms of use, etc.If work is carried out with their hands, the first layer is applied with a spatula S-shaped movements.And each approach should be perpendicular to the previous one.That is, if one line was across the room, then the second line of varnish should be applied across.

next layer is applied after two days (in the first drying time).Do it by roller or brush (which should be broad enough).Movement of the brush with the need to have a U-shaped appearance.If the roller is used, it is necessary to implement the movement back and forth (up and down).Apply a layer across and along the leveled.

When working with a roller in any case should not be allowed M-shaped movements, as some thickening may occur.If there is a break in work, the brush or roller can be kept at this time in a varnish vessel.With the resumption of the process is a little cushion to prevent the composition and roll.After the varnish was applied uniformly, the coating allow time to dry.

drying time may be different and depends on the absorbency of the wood, the mixture composition and environmental conditions.But, on average, to dry each layer takes about 2 days .For full curing must be 2 weeks.In fact, the parquet start to exploit you after 2-3 days, and bring furniture only after 2 weeks .

coating varnish parquet: recommendations when choosing a composition

In order to properly varnished parquet, seems to be sorted, but the important point is the choice of varnish.When it is important to consider buying basic properties and characteristics of both the composition and the coating.The packaging of each mixture they are written.In most cases, the determining factor in the selection are the expected load on the future of flooring (living room, store, salon, etc.).

Where there is a large cross, need lacquers with increased load.And if the flooring is laid in a room with a maximum attendance (bars, restaurants, cafes, museums), it is recommended to cover it with wax mastic or oil impregnation.For example, parquet flooring in the Ostankino museum operated for over 100 years, through constant application of wax to the surface of the floor.

In that case, when you need to give the coating a certain color, then again there is a question - how to cover with varnish parquet and if it is further necessary to be painted?The answer is simple.Today, there are about 2,000 compositions of various colors and tints.Therefore, you can choose just about any at the appropriate style (high-tech, classic, oriental, etc.).

Prerequisites for saving coating

As is known, the application of lacquer on the parquet is necessary in order to permanently preserve the original appearance of the coating.For information on how to varnish parquet floor, it has been told, and that's what you need to do to care for him?First of all, compliance with the parameters of temperature, humidity and air exchange.

air temperature must be between +15 C ° , humidity of about 50-70% and ventilation - 50 l / min. also important to know how to wash correctly parquet, and what tools to use at the same time.Not desirable wet cleaning.Would be the best dry cleaning with a vacuum cleaner or a special type of compositions Rubi , Loba Parckett Care or Glutoclean Pufas .They eliminate virtually any contamination and not leave behind traces.

When it was done varnishing parquet, then the coating can not walk in street shoes and heels.This may leave scratches.On furniture legs and some interior felt better wear "heels".It also will protect flooring from excessive loads and tracks.