Build Daily


August 12, 2017 18:06

Make a fence of plastic bottles with their own hands

plastic bottle has long ceased to be exclusively intended for industrial processing vtorsyrёm and became not only a creative material, but also a versatile building material.In particular, plastic bottles can be their own hands to make the original fence on a country or a plot.And the types of fencing, which goes a plastic bottle, ranging from low to curb capital fence.

Mini-fence: visual zoning and decor

The easiest way fence - a curb or a mini-fence bottles, half or more dug into the ground.Typically, in such a way at the site is zoned space, enclose the flower beds or garden paths, flower beds unusual form.Borders of the bottles can perform a purely decorative function.

Decorating plastic bottles

Finishing plastic bottles

To make such a fence is enough to dig the bottle, pre-filled with sand or earth, the perimeter of the flower beds or other areas you want to highlight visually.This seemingly simple, even primitive border can be the highlight of the site design, when you consider some of the nuances.So, you can "play" with the form, size and color of the bottles, alternating them on a pre-thought-out scheme.Interesting effects can be achieved by using a variety of fillers for bottles.For example, some of them filled with white sand, part of the - dark.It can be taken as a filler pebbles of various sizes and even broken glass.Surprisingly, the bottle will look, in which the combined different types of fillers.

buy instagram followers

guard on the wire

To protect the beds or flower beds, use plastic bottles, stringing them on a wire.As a rule, it is the low fences - just one level.However, you can bottle strung in rows, hold them together with wire nodes - get high and relatively durable fence.

A fence made of plastic bottles made ​​by hand

fence made of plastic bottles made by hand

fence plastic web

interesting technologies fabrication fence with their hands from a plastic web., Need a large volume of the bottle (preferably two-liter) to obtain a sheet.After removing the bottom and top of, the rest of the bottle should be cut into two rectangles.The rectangles are interconnected in a continuous web using a stapler.The resulting fabric is attached to the posts, mounted at the perimeter fence.

bottles cutting technology - the fence of the plastic web

Technology bottles cutting - fence plastic web


To make such a fence along the perimeter fence put poles, which are attached to the cross rails, shelving and thickly smeared their construction adhesive.Washed clean, dry, covered with sand bottle mounted on racks.

As an option, you can not stick to the bottle racks, and the same distance to fasten rails cork from plastic bottles.Bottles are screwed into the cork, and then their bottoms are fixed with nails to the top rail.In this case, sand bottles are not filled or filled only to half.

Sample intake of bottles

Sample fence bottles


caps for the manufacture of the fence can be used not only the whole bottle, but only by their caps.The main problem here - to collect the required amount of material.In the manufacture of fences around the average will need 10-15 thousand covers.Work laborious - drilled holes in the covers, and then strung them on a wire.Preferably, the bead cap is not chaotic, and to think of ways, some of them can make a pattern - then your fence will look aesthetically pleasing.

A fence made ​​of caps

fence made of caps

Capital "brick" fence of plastic bottles

cement or clay-sand fence using plastic bottles to build perhaps the most time consuming, but the results are worth the costs and time and effort.To produce such a fence, first rendered markup.Then the perimeter fence of the future at a distance of a meter and a half from each other digged poles.You can pour the foundation around the perimeter, and we can restrict a thorough cleaning and leveling grounds.

Clean and dry the bottles filled with sand, clay or grout, and then lay out in rows, like bricks, pouring cement or between the rows of the same sandy-clay mortar.Bottles should be spread out bottoms, while outside the fence will decorate cute "flowers", which can be painted in different colors.

If major fence of plastic bottles you plan to do high, it is recommended to spread out in two stages - first at a height of not more than half a meter, then, when the clutch grabs, spread the top of the fence.

Brick fence from plastic bottles

Brick fence of plastic bottles

grid of plastic bottles

Perhaps the most original method of making a fence out of plastic bottles - weave mesh.In a plastic bottle cut off the top and bottom, resulting cylinder is cut with scissors spiral width of not more than three millimeters.From the resulting long "ropes" weave mesh on the same technology as the fishing nets.Pulling the net between the posts, you can build the original fence.

advantages of plastic bottles as a material for building fences - their durability and efficiency.Moreover, if the matter is approached creatively, the result can be obtained non-standard and original.