Build Daily

Accomplishment

August 12, 2017 18:08

Gates made ​​of profiled sheet - how to quickly and efficiently carry out the installation ?

click fraud protection

Profiled Gate - what is the attraction?

newest building materials make it possible to carry out repairs and furnish own space and to construct various structures.As an example, consider corrugated board, which is considered the roofing material, but can also be used to create individual elements.

material is long due to the use in the production of galvanized steel, it is well withstand the load and the pressure, which is why corrugated board used for the creation of roofs, as well as for the gate equipment.There are several types of material, the parameters of which are regulated by GOST.light variations that can be moved with the help of the mechanism best suited to the gate.

Employees of firms engaged in the creation of the gate of corrugated board, recommend to combine materials to obtain a greater strength.If we are talking about the project for the private sector, we can always work with a sliding mechanism, which is ideal for decking.If the plans to create swing option, you can take a solid foundation and sheathe its galvanized material.

Preliminary work - what will decide?

Before thinking how to make the gate of the trapezoidal sheet, you need to become familiar with the shortcomings of material fact can not be so smooth as paint marketers.By cons include weak protection compounds, that is where formed rust and serious damage, leading to a deterioration in the quality of construction in general.But, despite some flaws in the material, it is considered the most cost-effective and quality enough.

To prepare for the process, in addition to the base material, you need to purchase a metal pipe, the diameter of which shall not exceed two centimeters.They will be the basis, which will be attached to the sheets.You can select the sheet so that one gate leaf were no seams, only connections at the edges at the joint with the pipes.

During the preparatory work, measure the length and height of the gates of the future, these dimensions will help to quickly prepare the material of the desired size, cut it and assemble one-piece construction.Beauty Get the gates of the trapezoidal sheet with the elements of forging, which look quite unusual and can fit in even the most sophisticated interior of a country house.

Putting the gate with their hands

Once the preparatory work will be finished, proceed to the assembly of doors and their installation.To build a one-piece construction of pipes and galvanized material, you need to prepare the ground on which it is secured.To do this, take a thick pipe, dig on the site of the gate of the pit into which will be inserted into the pipe.After the vertical alignment of the pit filled with cement mortar.Ensure evenness pipes need to constantly, until the full hardening cement.

not that difficult and the gate of the trapezoidal sheet with your hands, which you can do after the main works.

On welded to the pipe loop hang the gate.Many builders argue whether sheathing frame canvas sheeting needed immediately or should work with the base material after the gate will be hanged?

work with the canvas, placing them horizontally, much more convenient.The gate and the gate will turn a smooth, durable and qualitative performance, if you can carry out the operation on a flat surface using screws and tools, running on low speed.

instagram viewer