Konopatki log house with their hands and other final stages of construction of the house

How do konopatka log house with their own hands?

main structural element in the construction of wooden buildings and structures is a log cabin, which is a rectangular structure material which are processed logs from different species of wood.When the log cabin is called the design, made of timber or rounded logs, it is not true, because as a material used logs processed manually for this log.For the treatment used an ax and plane.

entire log structure consists of crowns stacked on a predetermined form, and held together by a corner between interlocks.Number crowns stacked, determines the overall height of the assembly.At the end of the assembly is made konopatka log house with a view to sealing gaps and ensure reliable insulation.

used to seal gaps moss, tow and advanced fibrous materials .For plugging the seal using special blades for which strikes a wooden hammer.The material is placed on both sides and, if necessary, is added continuously as long as the joints are completely clogged.From

grooves between logs fibers protrude from two sides of about 50 mm.Start work with the grooves at the bottom of the structure, and then gradually conducted along the entire perimeter.Simultaneous two-way konopatka protects the frame from possible misalignment.After about 1-2 years after the final shrinkage, conducted secondary konopatka.For this purpose, jute insulation, hemp, linen or wool, and uses the same technology.

Upon completion, all seams are decorative finish ropes and cables, of jute or flax.

What made resurfacing log with your hands?

next important stage of construction is grinding log with your hands, as usual logs originally differ slightly rough surface and uneven terrain.This work takes a lot of effort, a manual electric tool used with a variety of special nozzles.Typically, for grinding the main areas of applicable disc or belt sanders.All the hard to reach areas are ground by hand or specialized angle grinders (Bulgarians).

During grinding to remove surface dirt, which could cause damage to wood or disease.All logs are smooth surface, get a fresh new look, the tree structure is beginning to emerge more clearly.In order to fix the result, polished surface coated with special protective structures.

Finish log their own hands - direct the external and internal veneer

After grinding finish produced log their own hands.To the outside, the most commonly practiced varnish or special formulations containing various dyes. This coating not only serves a decorative function, but also a reliable protection .If the outer walls are not painted, it is strongly recommend that you regularly impregnate them with special solutions that preserve the appearance and prevents rotting wood.

Finishing log is not very different from the outside.It makes no sense to hide under a wooden clapboard structure beautiful polished timber.Therefore, interior decoration, mainly boils down to varnishing and staining according to the taste of the home owner.Naturally, it is also required from time to time to update.In the first place, because the livelihoods implies a permanent warm and dry air that can slightly change the geometric parameters of the tree, forming many small cracks.