Grout Tile - create a unique design

By what criteria is selected for a tile grout?

Claiming that using grouting can achieve a unique design, we did not move away from the truth.Well, judge for yourself, as there are types and brands of tile, and a variety of manufacturers offer you grout.It is unlikely that someone would be that it is facing you selected, in conjunction with your purchased daubing.

And you can choose the latest, on the basis not only for practical reasons, but also for decorative qualities.Thus, the composition is divided into epoxy grout and cement, wherein there is a modified version for each listed view.Factors which also need to pay attention - is the rate of hardening, chemical resistance, and the formation of efflorescence.

Never use old traditional way of processing the seams, according to the principle "the fasten tile, the grout and produce", this method has long been considered unreliable.

also grout for a tile varies in color.If you need a neutral color, take the usual cement mixture with a plasticizer as a filler, can be added if desired pigment into it to your liking, or to choose and color coating.

By the way, a variety of colors and tones you can offer to a few thousand.Creating your own color, the color of the tiles, do not rush to smear makeup immediately upon receipt of the necessary tone, first prepare the mixture slightly and apply to the tile, wait until dry, if the color is the same, get to work.

As used grout for tile joints?

Basically, coating the tile is no different from this kind of treatment of the same porcelain or glass lining.In any suitable, in your opinion, the dishes kneaded with water contents of the package, in the case of cement grout, or carefully transformed into a homogeneous mass component epoxy wash. especially should pay attention to the combined lining of several colors, in this case the grout must be done in portions of different shades .

When the mixture is ready (no lumps, consistency corresponds to a thick cream, and with the addition of pigment color uniform), take a plastic or rubber spatula and begin to push the resulting mass in the gaps between the tiles, trying to fill them to the full depth.Be prepared for the fact that the tile grout will be smeared across the tile until it came time to setting the composition, it does not threaten, you will have time to completely clean the surface of the lining.

How to clean tile grout from the joints and make nice?

So all the cracks between the tiles are filled, but how to clean tile grout from, if it is almost entirely, with the exception that its central part is covered with stains of finishing a drying mass.Start with the fact that work on the seams is not over, we need to give them a beautiful appearance.

to take this thick cable or at least insulated from it and putting it in length by plaster, fill in the gaps in the wall, hold along the seam with light pressure.A slightly recessed neat seam. If the composition of cement was used, treat with a special water-repellent impregnation .

And now is the time taken for clearing, or rather the preparation for it.Give a little time to freeze the seam between the heating water and adding a touch of vinegar to get it 8% solution.Then we arm with a soft cloth and sponge and begin to vigorously scour the remains of grout from the tile, while being careful not to damage the joints.

Moisture at this stage of coating is not afraid, but to abuse abundance of water should not, therefore, rags and sponges should be only humidification and not sprayed around him vinegar solution.