How to clean the ceiling of the adhesive after the tile

Toolkit works

Before you get started, you first need to stock up on some tools.For fast and quality cleaning of the ceiling is better to use:

• chisel;
• spatula;
• sander;
• Bulgarian;
• respirator;
• goggles;
• gloves;
• stepladder.

The easiest way to remove the adhesive ceiling.

most quickly and efficiently clean the ceiling of the adhesive helps grinding machine installed on it with sandpaper.You can use the grinders and setting it a special cleaning disc of stiff wire.The purification process results in abundant dusty environment, because all the possible open windows and doors for ventilation (it is not necessary to open the door to the room where there are no plans to carry out repairs).

to protect the eyes and respiratory tract, use safety goggles and a respirator.To protect against vibration hand tool, you should use thick fabric gloves.In addition, they will help prevent injuries and excessive contamination of hands during the cleaning of the ceiling.

What else can remove the adhesive ceiling.

In the absence of the aforementioned devices you can use the means at hand, such as steel wool, iron trowel and chisel.Removal of adhesive from the ceiling turns into hard work, not only because of its tenacity, the main difficulty creates a location surface being cleaned - Clean ceiling just very uncomfortable.However, if you find a long handle and attach the metal spatula, it is possible to spend the bulk of cleaning without using a ladder (not dragging her around the room).

Why do most of the work?And because it is impossible to clean the spatula various hard or rough spots - they will have to clean out the chisel.Using a ladder and picking up close to the problem areas, you can carefully, piece by piece, to remove adhesive residue.Next will be only zashpatlevat or primed surface, and you get a smooth and even ceiling, ready for a new finish.

Useful tips for cleaning the ceiling.

To reduce the amount of dust in the air cleans the room, simply wet the entire surface to be treated with warm water.Note, however, that the adhesive is impregnated with weakly and completely wet in one pass will not work.It is necessary for cleaning the glue from time to time, soak it, especially after a big shot formation.To speed up the peeling adhesive can take advantage of special corrosive ceiling adhesive substances, dissolve them in water and this solution to wet the ceiling.Do not forget to lay on the floor old newspapers or plastic wrap - it will help keep the floor space and simplify cleaning after work.