Why sink under the table top ?

Why sink under the table top?

When developing design of the bathroom, we usually allocate space, where there will be all sanitary devices and appliances.Sometimes it turns out that most of the devices are arranged along one wall.In this case, most of the designers advised to arrange this option worktop.It helps different things and acquire a general view of the general thrust of style.In general, it is in itself can be the epitome of exclusive bathroom design.

Merge into one washing machine and sink, really only by a counter.But not all are suitable for cleaning this mess.For example, the suspension or on the stem - tulip is absolutely not acceptable.For these purposes, it is best to use the built-in overhead or sink bathroom with worktop.

Types of shells under the countertop

recessed or mortise, they got their name because of the installation method, they cut into the countertop.It is the most common method, such shells less overhead, but are very attractive and unusual design.Moreover, such cleaning can be mounted either just below countertop, or slightly above or at the level.Plus, this installation is that the worktop with sink does not clutter the space, as it were, freed him.The downside is that the installation must be observed very clearly all dimensions, and be sure to lubricate the joints good sealant to avoid unnecessary leaks.

Surface cleaning, as you know, set just laying on the surface.Themselves can serve as a decoration bath, no joints, mortise like washing can be installed above the washing machine while retaining the extra space in the room.

How to install the sink in the bathroom with top

In general, it is difficult in this nothing, and can be set independently.At the same time you need to remember these things:

1. installed plumbing must be easy to operate.
2. It should not be placed up against the wall.
3. It should not be on the edge.
4. And of course it should not fall inside.

And so, to determine the general direction, proceed directly to the installation.What you need to manually set the sink with countertop:

• line;
• pencil;
• hacksaw;
• drill;
• sealant;
• pliers.

Take sink, turn over the surface of the countertop upside down and outline the outline with a pencil.Then measure the distance from the fixtures to the sink edge.In outline, which we traced to this, we do the latter, reduced by exactly the distance that we measured from the mount to the edge.On the second loop should be cut a hole for the sink with a hacksaw or jigsaw.

then sanded, polished and very well-inside edge cut, treated silicone, then insert itself sink.If landing squeeze excess silicone, it is necessary to remove it.Insert and tighten fasteners.Actually shell is inserted, and now this construction should be left to dry completely.Then it will be possible to connect the siphon and a mixer.

can certainly hire a specialist to do all that myself, but you can put a little bit of his skill, enthusiasm, and perhaps even creative zest for mounting the sink with countertop in the bathroom.