Drovnitsa fireplace in the interior, and fuel is always at hand

drovnitsa fireplace, a large patio and a small bedroom

If you do not have a gas fireplace for the winter necessarily needs a hefty supply of firewood.But in the room as the wood can not be stored, even if the goal of fuel mezzanine.Consequently, drovnitsa needed not only in the room, but also on the street, like a kind of woodshed , but with some differences.First we determine the location.Our store fuel for the fireplace should be located near the front door, so that the frost had to be a minimum amount of time outdoors.So it is wise to put drovnitsu near the back door, as near the front structure is inappropriate.However, the convenience in the first place, therefore, if there is no back door, we can build our wood store and near the only door.

drovnitsu Desiring to establish the fireplace, look for the ones that are sold in the shops with accessories for the garden.For the most part there drovnitsy metal resistant, but are designed to carry, if not stationary.In other words, to deliver firewood to the fire you will either have to stand together with them, if any, in his arms.And the price drovnitsa that forged that chrome, considerable.Is not it better to do it yourself this simple element of the interior, in such a way as to drovnitsa fireplace moved directly on the floor without requiring you to greater effort.Thus, we manufacture wheeled variant of increased spaciousness.For this we need the bottom of the plywood 15x320x490 millimeters and 15 millimeters thick boards: For 70x1030 supports in the amount of 8 pieces, 2 blank 120h520 millimeters for crossbars 90x520 mm - 3 pieces, 90x320 mm - 4 pcs, 90x335 mm - 2 pieces.Also need bars 20x35 mm: 2 pieces of 280 mm length and 2 pieces of 490 mm.

drovnitsa fireplace with his hands, the advantage

mobility To drovnitsa was qualitatively made, in addition to the materials listed above you will surely need tools, including a jigsaw, preferably an electric fireplace with his hands, andin the absence of such a normal, but with plenty of nail files.Also, pre-cook 4 furniture castors, carpenter's glue, screws and nails (and those of other more), as well as plaster and a black matte paint.We start with two pieces of boards 120h520 millimeters, which will outline the top of our facilities.With the help of a jigsaw Scrollsaw two V-shaped pieces, trying them to get exactly the same.In fact, this is the hardest part of the job: in the middle of the wide faces (denoted as A and B) put marks A1 and B1, from the last 2 centimeters reckoned to A1 and set another point C1.Now, the narrow sides of the adjacent side A with them reckoned by 2 centimeters, and also put the mark on which to hold the line A1 and C1 of the point draw a line to the corners between the sides and the side B. As a result, we get two pieces, like steering wheelsthe height of the aircraft.

second part of the work - assembling the four corner posts (each consisting of two planks 70x1030 mm).To this end, one long edge of the board glue to the edge of another board, and then cobble together their nails. To avoid having gaps, compressible parts are clamps or a vise .Determine for yourself, where will be the top rack, and connect the top of each pair of our V-shaped workpieces, turn up an obtuse angle, and fasten the workpiece glue and screws to the inside of the boards on which the visible nail heads.Below on the same board racks to apply and fasten cross 90x520 mm, eventually getting two frames with a kind of arch top.By the way, over the V-shaped workpieces, which must be completely hidden behind the front board racks, and now these ugly stick projections for the facial boards.We take a saw and cut off their top edge of the V-shaped design details.Frames are fully prepared.One of the frames, front, has been postponed, and the second in the middle (the inside of the rack) fasten another cross bar with dimensions of 90x520 mm, the last of the three available to the us.

final part - complete assembly drovnitsy.Putting the frame side cross, top, bottom and middle.Fasten the top and bottom, with the participation of adhesive details 90x320 mm, and in the middle - 90x335 millimeters.Boards have now completely exhausted, leaving the bars and the bottom.In the lower part to the crossbars drovnitsy constituting rectangle fasten the bars along the lower edge, which, in turn, secured by screws bottom.Grind the entire structure, shpaklyuem, grind over and cover with black paint in 2 layers, eventually getting on dry imitation of metal.It remains at the bottom to attach directly under the rack, furniture rollers and top to the front of the frame, again to the posts, furniture handles, U-shaped, vertically disposed on racks, knobs or buttons.You can tie a knob horizontally centered V-shaped parts, but two handles roll drovnitsu unlike the more convenient.

Street drovnitsa for a year's supply of fuel

surely get us drovnitsu nezazornym will put on the most prominent place in the living room, and a stock of firewood that can deliver to the fire from the very threshold, enough for the whole day.However, as already mentioned, in the hallway is not stored firewood for them to find a place in the yard, and this is another drovnitsa, however, a little more.For its construction we need 4 beams, two of which should be higher so that at a distance of 2 meters between the larger and smaller pillars height difference turned 15 centimeters.Bars serve shorter corner pillars in the rear drovnitsy, high beams will make it part of the facade.In-Ground poles arranged in a rectangle hole depth of 60 centimeters, obkladyvayut small stones mixed with clay, and every 15 centimeters backfill required quality tamping.Logically, the higher posts, the more they will fit under a pile, so it's best to shorter bars are about 2.5 meters long.

to wood in the ground does not rot, it is necessary the lower part of the column, is immersed in the pit during the installation of poles, covered with bitumen.

on the sides and at the rear of the structure fasten wide boards thickness not less than 2 centimeters.On each side of the construction must be secured one board diagonally.The back side is strengthened by two boards, one end of which are fastened to the tops of the towers, and the other connected to each other at the bottom of the rear batten.Also, the reliability of the diagonal planks are fastened to the cross.Outside, the side and the back side of upholstered galvanized mesh to the wood from falling down into the gaps between the planks.The tops of the pillars of the connected frame beams or slabs, thus turning into support.Next, mount the rafters made to the beams of the base frame by means of special metal brackets or common areas.For aesthetic reasons, it is best to drovnitsy roof to use the same material, which Indoor your vacation home.On the ground under a canopy to protect the wood from moisture, you can put two finished pallet, which are sold at some home improvement stores.Street drovnitsa ready, you can bring in firewood.