Production of upholstered furniture with their hands

course, many faced with the necessity of repair of upholstered furniture or its replacement with a new one.A wide range of shops you can select whatever you want.But, at the same time, the price of quality furniture products make you think, how difficult it is furniture with his own hands, and some time will be spent on this process. turns out, nothing is impossible, and make the sofa or chair, although it is difficult, but it is possible.Especially because this has obvious advantages.Firstly, this furniture is 100% original.It will be a matter of pride.Secondly, it will be much cheaper than buying in the store, and there is not always possible to find exactly what you want to see in his apartment.

Common Action

plan 1. furniture choice to

It turns out that the production of upholstered furniture with his own hands a lot more practical and profitable.Having made the decision to do it yourself do not be afraid of difficulties, and they are sure to arise, make a plan of action.First, decide exactly what you want, what kind of functionality should have your furniture.This is a must, as it depends on the mother's choice, which will be used.The next step is also very important: the development of drawings.You have the skills - do it yourself, do not own - look on the Internet.Quality furniture with his own hands the drawings which need necessarily be obtained only by the size of observance.

2. Work with individual parts

Naturally, it is necessary to begin the work with the establishment of the framework.Then prepare the individual elements of the joints which will be discussed later.Here and useful drawings with accurate dimensions.Marking separate parts is applied to the material, carefully and thoroughly checked everything and then you can begin to cut the workpiece.If done correctly, in accordance with the drawings, the first fitting is to show how the details clearly stykovyvayutsya with each other.When inconsistencies, mistakes must be corrected immediately, adjusting elements of upholstered furniture to full compliance.

3. Determine the type of connection parts

Select the type of connection will depend on the purpose and functionality of the furniture.If you make upholstered furniture with his own hands for the permanent use in the same state, it is necessary to connect the parts with nails, screws, screws or glue.If the furniture is planned to dismantle or lay, it is necessary to use so-called lapkovy mounting method.In any case, the work should be done carefully, eliminating the possibility of bulging nails, glue stains.At this stage it is necessary to handle all the rough edges so that they do not protrude through the upholstery and discomfort brought in the future.

Widget from SocialMart

Tip: Provide an option to attract additional labor when connecting parts.Alone do problematic.When using glue, it calculates the time it is completely dry and then continue to work.

4. Choosing and creating upholstery

At the final stage of upholstered furniture created with their own hands, need to sheathe, to make the appropriate title, that is soft.The most common use foam, medium thickness.Furniture can be upholstered in any fabric, to your taste.The material should be cut at a pre-made blanks and fastened to an article by means of staples.And this should be done so that they are not visible to others.
Well, perhaps, with the general recommendations we figured out, and now let's try to make upholstered furniture with his own hands.

Folding sofa bed: the gradual establishment

Thus, we consider the question of how to create their own hands a popular and versatile sofa bed.In this article, we'll use a little unusual transformation method: seat for guide bars pushed forward until it stops, and the back of the sofa is placed in a horizontal position by turning 90 degrees.
Start with the base.To create take the board size 15h5sm.Using screws and screwdriver collect from their foundations, whose dimensions are 190h65sm.The bottom of the plate making fiberboard, Shoring it on both sides with the help of rails.Moreover, what we have fasten the legs.By the same token, do the back and seat, stuffing fiberboard from both sides.In the inside of the seat zapilivaem bars, creating additional strengthening.

Tip: when you create a couch, aware that it is in the upright position, its soft part of the face outward.To give greater softness and aesthetics will help cushion of polyurethane foam, wrapped in holofayder.

Last, but most important, step in how to make your own soft furnishings, is to create a mechanism of transformation.The backrest is connected to the base by means of the most common loops bolted screws.In the field of twisting, you can assign additional bars that only improve the quality and reliability.Create a side wall of fiberboard or not, this is the decision of each individual owner.

Well, this is quite a simple way you can get upholstered furniture photo that you see before you.

And fully understand how to make furniture with their hands helps video, which you can see below.