How to install the water filter in the apartment - instructions

tells how necessary filters for water purification, does not make sense.Looking at the water that flows from the tap, almost everyone laments the Criminal Code and "vodokanalschikov" that rates are constantly improving, and virtually no changes.water purification problem of concern to many owners.

No wonder there were many "environmentalists" (they are exactly and presented) in recent years, who go from door to door, collecting people and enthusiastically tell how dangerous is the water that we consume from the main thoroughfare.But the ending is the same - buy from us "this is", and the rest of his life will "jump for joy".We will deliver you, and connect, just pay.And you can do without these "benefactors" - to buy filters for cleaning yourself and establish your own hands?So we look at how to do it.

No particular difficulties in this, since any cleaning device there is an instruction, which necessarily have a section dedicated to the installation.But considering that in each home its own characteristics, we consider only a few moments, explaining that it is necessary to take into account.

Installation simple mechanical filter (coarse) cleaning of comments does not require.The only recommendation - it is desirable to acquire the device with a transparent body.However, such models are only suitable for "thread" HVS.The best option, if the filter has a built-in meter - gauge.You can read a detailed article on the choice of filters.

Site Selection

main criterion on which most often we focus - as his "out, out of sight, to hide."And this is understandable.This setup does not add attractiveness of the interior.But that still provide?

• presence of free space, based on the size of the product.
• easy maintenance.
• visual control, as the likelihood of leaks in the circuit can not be ruled out.
• connection.It is understood that less than the length of the connecting hose, the better.

Mounting tee

To ensure the flow of water into the filter, the total "thread" is necessary to make the challenge.No point in all water consumption, including for households / needs, "chase" through the device.It is therefore desirable to separate the different supply valves, one of which - only for water intended for drinking or cooking.

Where to install a tee - the owner determines himself, knowing his destination.

Crane

He will put in front of the device.What for?Suppose you want to carry out maintenance of the filter.In order not to leave without water the whole house by cutting off its supply by means of a valve at the inlet, enough to block only the "personal" tap.After that you can safely take a partial disassembly of the device.Even if you need to buy something and replace (and the time), you will not have to ask for water from the neighbors - it will always remain in the common rail.

compounds

All hoses are connected according to the instructions on the product - here explanation is not required.The only reminder - the quality of the connections.The best material for sealing joints - Tape FUM.It is commercially available and is an average of the coil 15 rubles (depending on the "canvas" of width and thickness).All the "antiquated" methods - tow, and the like, are ineffective, especially if there is no experience in the plumbing works.

Verifying

meaning of this event is not to make sure that the water is really gone.The main thing - to determine the reliability of all connections for leaks under pressure.

Here, actually, and all details.And it does not need to pay someone else's services.Himself always do better - slowly and carefully.

But do not forget that even if you set the filter "thin" water treatment, it does not mean that without a "sump" can well do.Bulk filter is placed in either case, a common thread, the "input".