Forms and installation of interior partitions

Interior walls, built with his own hands, you can create a comfortable environment for living or working at home.

interior walls is a structure whose purpose is to zoning space.

As a result of redevelopment in the residential area unable to build even one or more separate rooms due to the decrease of other rooms.

Thus as baffles can act as a stationary fixed structure and mobile, which if necessary can be easily assembled and dismantled just as with his own hands.

collapsible interior walls are often used in the home for temporary zoning dining room and kitchen, dressing rooms and bedrooms.

Also with the help of a large entrance hall separated place in the cozy living room.

all embodied in the reality of design solutions can be seen at the proposed photo.

Photo:

build of interior design, which could, if necessaryto provide a new separate room with heat and become a barrier to noise, erecting a sturdy structure made of durable, dense structure of building materials.

Such partitions installed in the house with the use of drywall, wood and foam blocks.

As you can see, each named material is light weight, which is very important, if the construction of the fixed partition is necessary to carry on the second or subsequent floors of an apartment building, in an apartment.

More detailed information on this subject you will find in the information offered below, as well as photo and video materials.

Interior design wood

Interior partitions made of wood are divided into three types.They can be frame-obshivnymi, pre-assembled - Panel or to have a continuous surface.

Such structures can be built with their own hands in a private house on the second floor, or in a multi-storey apartment building, causing no need to further reinforcing intermediate floor.

Partitions frame type, as in the photo, made using bars 50h90 mm, which is mounted in a horizontal or vertical position.

Photo:

Cross members is fixed at the joint finishing material.Vertical set distance, which will depend on the size of the finishing product.

Increase the sound and thermal insulation performance design allows the use of insulating materials.

Lightweight continuous walls erected with the use of the type of boards 40-50 mm, which are mounted vertically due to the pre-set guide bars.

Otherwise wooden racks can be attached directly to the beams and joists of the house.

then built frame is sheathed with any finishing material, which is used as drywall, plywood or battens.

Panel interior walls, in the apartment in the photo, are pre-assembled panels.

However, their shape and size will depend on from what material they are made.

Wooden interior structures of wood may be blind, have a sliding wall, equipped with doors.

doors Box is collected separately or simultaneously with set mounted partition.

Frame partition with his hands

consider the most efficient and easiest option partitions device obshivnogo skeleton-type house.For its construction will need to make the harness using the timber.

size of the future of interior design and its weight will be a decisive factor regarding the timber size.

bearing beams and stiffeners better framing walls made of wooden beams with the same cross-section.

Video:

savings allows for the use of internal stiffener bars with a smaller cross section.

Before starting the Workflow is made with their own hands the frame room divider circuit, which is why its construction will be made at no extra cost.

sliding frame structures require the prior acquisition of special mobile machinery.These partitions are mounted inside or outside thereof.

If the partition is mounted in the frame of a house on the basis of the rough floor, the guide construction elements can be fixed on the floor cross-beams or along them.

With the high ceiling of the room, you can prepare for the fact that the overall design would have considerable weight, which is why the support base can prosest.

To avoid this, do better for floor reinforcement beam.When mounting the partition on the second floor of a multistory building or apartment, it is necessary to calculate the structure with a lighter weight.

Step framing device of interior design:

1. Spend layout work area using twine stretched, by which point a straight line to the installation guide;
2. Primarily, the guide elements fastened on the ceiling surface, then in the planes of the walls and floor;
3. Mount stiffener frame in increments of no more than 600 mm.The exact interval depends on the cladding size articles;
4. installation correctness checking spirit level and plumb.The structure assembled is treated with an antiseptic;
5. In the next stage of work carried out by isolation, the selected material is fixed between the inner edges of the structure.Make it better with the help of pre-stretched with their own hands or wire mesh;
6. Upon completion of the construction work insulating sheathing can start finishing material.

read more about the stages of the workflow will enable the following video.

Video:

plasterboard partitions

frame of interior design for drywall apartment erect with his hands, using a metal rack and the guide profile.

To make the design of the drywall stronger, and at the same time improve its insulating properties, it is better to choose the profile with a width of 50 to 120 mm.In

whereby the inner space of the partition can be placed a thick layer of insulating material.

phased arrangement of interior plasterboard partitions:

• The apartment is held marking the future location of the partition.On the lines held on the ceiling, floor and side walls mounted guide profile with the use of wall plugs.With the level of evenness of the installation is controlled by profiles;
• Make plasterboard partitions with rigid walls allow the installation of metal ribs, as that will be the rack profile.Rack mounted vertical profile with a pitch of 400 mm.The upper edge of their own hands are inserted into the guide element of the ceiling, the lower - in the guide member fixed to the floor;
• doorway is also formed from the profile of rigidity to the door duct complement timbers;
• Ready frame sheathe plasterboard, first with one hand.After that, the internal cavity is filled with an insulating partition product.Then carried plasterboard lining partitions on the other side.

In such a structure its flavor can make a sliding door coupe, as in the photo, which are easy to build with their own hands and are also easy to install due to the guide and rolling mechanism.

Video:

More information can be gleaned from the proposed video material.

interior walls of the foam blocks

Interior partitions from foam blocks, as in the photo, it is possible to build not only a private home, but also in the apartment.

Under the lightweight material is excluded subsidence of the base substrate, and the cleanliness of the working process and the speed of installation of the foam blocks to anyone not deliver inconveniences.

All that is needed for the construction of walls of foam blocks is - the blocks, the adhesive solution - is produced in accordance with the instructions printed on the package and fasteners.

Construction partitions from foam blocks held on the following schedule

• Construction area cleared of debris.With the level of flatness is checked, which will be made masonry blocks.If the site is defective, it is reduced by applying the screed, and after its full ripening commence laying foam blocks;
• working part adhesive foam block is processed, after which it is placed on the marked surface of the floor;
• first row of masonry is standard, then the second row of blocks is placed with an offset.The output is laying in a checkerboard pattern.

If necessary, concrete blocks can be easily cut it with a hacksaw on wood.If for this purpose to use grinders with diamond wheels, will be a lot of dust.

clearance between the top plane of the partition and the ceiling is recommended to blow out with foam.

Video:

Furnish finished room divider is carried out after the adhesive is completely dry.

As a rule, interior partitions provided with the door.It can be hinged doors, or better still, sliding-door coupe, as in the photo.

Under normal doors are made separately for a box of pre-prepared opening, which put on the door leaf.

sliding doors mounted on a pre-assembled rolling mechanism.