Why noise washing machine and how to fix it ?

Foreign objects

actually very banal reason faced in most cases.You have not got a different kind of pocket change (for example, a coin) or metal fasteners on clothing beat of the drum, causing the washing machine is very noisy in the wash.To determine this, you can cause the characteristic sonorous beats of a drum.

Well, if all fines has remained in the drum, but if foreign objects are caught between the tub and the drum, it is necessary to strive a little bit.You need to remove the heater and through the opening to get all the items, and then put the parts back.In some models, all small things can fall into a special clarifier, where the filter is installed.In this case, if the washing machine noise during washing, need to find a sump cover (usually the front, a small door is closed), unscrew it and remove any fallen objects.

not removed in transit bolts

The manual focuses on the mandatory twisting shipping bolts after delivery equipment to the installation site.Despite this, most people forget to unscrew them, resulting in a noise during operation, which are accompanied by the noise of the washing machine.

The diagram shows where installation bolts:

All you need to unscrew it and recheck performance.

draw your attention to the fact that we should not throw out the transit bolts in the trash, as do many.If you decide to carry a washing machine from place to place, they must be screwed, or during transport may damage the internal mechanism.

Improper installation

Equally simple hands-free operation is the cause of incorrect installation of the washing machine.Even a slight misalignment can cause vibration, which occurs when the equipment at high speeds.As a result, you hear an unpleasant sound, which is easily removed by unscrewing the legs to a strictly horizontal installation level.

correctness of the work done, you can check the level of the building.It exposed a crooked body is the reason why the washing machine vibrates and jumps on the floor, resulting in audible, as she roars.

Bearing Wear

more complex failure to resolve that require specific skills.Bearing wear can occur if the oil seal is damaged, which prevents water ingress.As a result, the water seeps into the bearing, it is its corrosion and failure.

Define the problem as follows:

• on the back cover of the tank from the outside are formed rusty streaks;
• drum move on uneven shaft, if a little push with his hand;
• during the spin cycle can be heard whistling and strong hum.

to you was clearer replacement process, provide visual instructions:

Loose pulley

If during the wash cycle, and especially spin you hear intermittent clicks whichcause extraneous sound during operation, then most likely it is loose pulley.Nothing dangerous in that there is no damage, it is necessary to remove the housing cover and tighten the screw (or nut) with a wrench.Please note that when a failure washing machine will make a noise as small and at high speeds.

recommended that you completely unscrew weakened spare, put it on the sealant, after which obtyanut key properly.In such a case, weakening of the pulley does not occur in the future.

Loose counterweights

By analogy with the previous problem is solved and the problem with weak balances.You must allow access to the bolts and tighten them, then the background noise of the washing machine must abyss.

With counterweights may be linked another option failure - their complete destruction.In this case, the sound will be louder and will have to carry out the replacement of broken parts.

Failure of the drainage pump

If the washing machine is buzzing at the sink, there is only one reason - the drain pump is out of order.You can try to repair it, clean the filter, located on the front side of the cover (as shown in the picture).

If the machine noise is not due to a dirty filter - check spout may be clogged and it is necessary to carry out cleaning.Well, the most critical variant - full output of the pump failure, resulting in a need to carry out the replacement.

understand that the reason for the roar of the pump is possible if extraneous sound only appears when typing or when the water "stiralka" drain.Normally, when a broken pump washing machine hums like a transformer.

Opyat-taki better see the essence of replacement by visual video tutorial:

That is, all of the major causes of increased noise and whistling technique.We hope that now you know what to do if a noisy washing machine during the spin cycle, draining and rinsing of things!

If none of the above reasons do not fit the description, then the matter is likely in the motor or electronics.There is already a better bring a wizard that will ring all the elements of a multimeter circuit, then quickly find the reason for which the machinery noise at work.If you have questions, be sure to set them to our experts in the category FAQ!
Related items:

• How to choose a cheap washing machine in 2015
• How do the wiring in the bathroom
• How to use a multimeter