Laying the apron in the kitchen : step by step instructions

Apron for the kitchen is not only a beautiful design element, but the functional part.In the process of cooking on the walls inevitably there are stains, drops fall from the sauces, food slices, etc.To protect the surface of the wall and to facilitate cleaning, it is recommended to lay apron easily washable materials - tile, stone or glass.In this article, we'll show you how to make an apron in the kitchen with his hands.

Preparatory moments

apron in the kitchen improves performance, and at right selected colors and design - decorates and completes the interior of the premises.With it, you can visually enlarge the space and emphasize the dignity of kitchen units, hide the shortcomings of planning.A variety of finishing materials allows you to put into practice the most original ideas.But to begin construction of what else should be regulation.

Design apron

first step is to determine the design of the apron - choose the shape and color.Coverage should be combined not only with kitchen unit, but also with other elements - accessories, furniture, decoration floor, walls and ceiling.During the renovation in the kitchen, many have focused on the selection of wallpaper and flooring, completely forgetting about the apron, and in fact it gives the interior integrity.

How to choose the color of the apron:

1. If the kitchen is dominated by neutral pastel shades, but the walls and set in contrast to each other, they must be harmoniously combined into a single image.To do this, select the apron as close as possible to the color of the headset, making it in the tone of the cabinets or countertops.
   
2. If you plan to make the kitchen is completely white, the white apron will be "lost" in a monotone interior, so it should do a contrast and bright.Use the "juicy" colors, causing appetite.It is proved that it is capable of not only the "acid" colors (light green, yellow, orange), but also the blue tones, from deep blue, azure finishing or indigo.Such a bright apron is recommended to "support" a variety of accessories - shelves, painted in tone handles lockers, colorful vases or figurines.It is important not to overdo it, to not refined interior turned into lurid bad taste.
   
3. If the situation is exactly the opposite, and the kitchen have a color set, the apron must support not only the color but also texture.Thus, under a beige furniture will look good apron contrasting dark granite or artificial stone.Very harmoniously apron it looks identical in texture and color from the table top.
   
4. Blue headset looks good with asphalt-gray apron.You can also use warmer colors (light coffee, beige or creme brulee), then warm tone "soften" cool blue notes of the headset, and make the environment more comfortable.For green headset can pick up green apron, but with a lighter or darker shade to the kitchen is not merged into a single spot.
   
5. Very original look aprons discreet tones edged in bright ornaments countertops and built of tiles of different shades of one color gamut.
   
6. bright colors aprons are good by the fact that when they are bored, you can apply over painted or glued to an interior vinyl stickers.
   

In most cases, aprons made of tile, because it is the most affordable and suitable finishing material on the market, but if you're not shackled in the media, it is possible to make the interior more stylish and original, erecting a stone or glass apron for the kitchen.

fabric apron

consider in more detail each of the materials used to create the kitchen aprons.The choice depends not only on the color category, but also the complexity of installation and performance.So, if a laying tiles or artificial stone can handle even an inexperienced person, the situation is much more difficult with glass panels.

What do apron for the kitchen with his hands:

1. Tile - among all the finishing materials for the kitchen tile remains a favorite and is not going to give up the position.It is inexpensive, relatively easy to install, does not require special care, and the range of colors allows you to realize any designer's whim.Ceramic Kitchen apron is resistant to household chemicals, small mechanical stress, temperature changes and, most importantly, the humidity.Such coverage will serve perfectly for more than 10 years.
   
   And if in Soviet times was the choice of tiles, to put it mildly, not rich, but today you can freely "roam" and create real masterpieces of interior art.Thus, it is possible to combine large elements with fine mosaics, tile monotonous painted with bright accents, make patterns and designs.One of the most notable examples is metlahskoy tiles.It is very durable finishing material, wherein not only durable, but it is absolutely amazing textures and colors.
   
2. Stone - If you always wanted a truly luxurious kitchen, your path lies in the department of finishing materials from natural and artificial stone.Make the countertop and apron of a material, and the kitchen will be transformed instantly.Mainly for use apron laying marble, granite or basalt.When choosing a lining made from natural rocks must be considered the physical characteristics of the stone.Thus, granite has a very dense structure, practically does not transmit moisture and will last for several decades.Marble is more whimsical and breed requires constant care.He has quite a porous structure, so if you spill on the white marble of red wine or a spicy tomato sauce, can stay Nondeducibility spot.Therefore, after laying marble apron should be covered with moisture repellent protective agent.
   
   Aprons made of artificial stone is much cheaper and in many cases much more practical.Such materials are made on the basis of a mineral filler (stone dust), acrylic resins, and various pigments, which give them the appearance of natural stone.The advantages of such a lining is that it is very dense and has no pores, so is not able to absorb moisture and keep to himself the memories of borscht sprayed in the form of red spots.Litokeramika is as easy to install as a regular tile, even adhered to the same adhesive.
3. MDF - this apron will look perfect only if the adjacent table top made of MDF.This material makes it possible not only to create an original interior, but also to align the surface of the wall.In this case it is mounted on a conventional liquid klyaymery and nails, and the surface does not require pre-preparation.
   
4. stainless steel - very original and stylish solution that will appeal to fans of high-tech.This material is rarely used, and it is in vain - it is absolutely fireproof, is not susceptible to corrosion, environmentally friendly and extremely durable.If you decide to install an apron made of stainless steel, back of his elements in wood, glass or glossy plastic.
   

Tools for laying

Because in this article we'll show you how to put an apron on the kitchen tiles, the tools and materials will be selected in accordance with the mounting technique.Before going to the store make measurements and calculation of the required number of tiles.Buy with a margin to leave a few tiles in the case of repair.

Materials and equipment:

• tiles;
• tile adhesive (recommended Ceresit CM11;
• primer deep penetration;
• grout (in tone to the tile);
• builder's level, a plumb;
• Tile;
• rubber spatula;
• trowel;
• a sponge;.
• plastic crosses for tile

you will need skills tile for wall-thin tiles, you can use the most common manual mechanism

Laying apron of tile

Before we get started, let rational assessment..its capabilities - if you are not sure that will cope, it is better to hire a professional and not take the risk to spoil the materials for those who wants to get a new interesting and rewarding experience, we have prepared detailed instructions on installing an apron in the kitchen

Marking apron

..

first stage - marking the walls.This is an extremely important point, which will depend on the final result and aesthetics of your masonry.To make a correct and clear layout, you must be able to use the building level.Ideally, the best guide to get a laser - they significantly speed up and facilitate the process.

Another important point - the wall before marking should be as smooth.If this problem will have to apply a leveling plaster.Otherwise it is necessary to compensate for differences due to the thickness of the adhesive when installing the tiles.

There are different standards stacking heights aprons in the kitchen, and this option should be selected in accordance with the size of kitchen units.In the middle of the floor lay 80 cm at the height of the apron 75 cm. Thus, you get to lay 7 standard sized tiles 10x10 cm in height and 5 cm will remain at the seams.

Draw a horizontal line at the place of laying the first row of tiles.It will rely on a special rail.To do this, you can use an ordinary piece of wood or metal profile.Screw the support to the wall with dowels and check the building level.

Draw a few vertical lines perpendicular to the bar to create additional guidance.

Adhesive materials for laying

Another important point before starting work.Tile for kitchen on an apron is recommended to plant at the most popular among professional builders adhesive Ceresit CM11.Low flow will allow you to save, of course, if the walls in the kitchen straight, and need not be aligned by the adhesive.Thus, 5 sq.m consumes about 12 kg of composition.When laying tiles on the rough wall consumption can increase.

Stir dry mixture with water according to the instructions, using the building mixer or a drill with an attachment.

To lay the first row of tiles, which will be based on the bar should miss the mark on the wall with glue and a length of 3-4 tiles to make them quickly, while the composition is not dried up.For spreading the adhesive using a notched trowel in order to remain on the surface of the shallow groove - this will improve grip and reduce the consumption of the solution.Also, for better adhesion of the glue to the wall it is recommended to make small scratches with a knife-jamb or sharp edge screwdriver.

Laying tiles

prepare materials before laying, you may need to process and place them at arm's length: spatula, crosses, a container with a solution stack of tiles.

Progress:

1. Make incisions on the wall with a screwdriver or a hammer.
2. Treat wall primer deep penetration.
3. Screw the horizontal bar in accordance with the markings for laying the first row of tiles.
4. Begin to lay out the tiles from the corner.
5. between tiles install plastic crosses, constantly monitoring the position of the elements with the help of a spirit level.For tile size 10x10 cm suitable cross 2.5 mm thick.Stack crosses can be different, but professionals recommend not to install a crossbar 4 tiles, putting her in the doorway, because to get it then it is very difficult.It is better not to save money and to put crosses sideways, then to easily pull out after drying glue.
   
6. When you have pasted 10-15 tiles, remove the adhesive from joints until it is completely frozen.If this wait, time to sweep will take far longer.
7. Particular attention should be paid to an outlet.It will be very useful, if they are just there, where the tile can be a simple rectangular sections, but they are sometimes quite difficult to do.To do this you will need Tile, a couple of test tiles and 5-10 minutes of practice.
   
8. When stowed the last row, leave the tiles on the day, the glue properly grasped.After that you can start grouting.Dilute the composition to a consistency of very thick and sour cream with a rubber spatula with light pressure fill the space between tiles.Prior to this, do not forget to pull out the crosses.
9. When the grout hardens, flatten uneven seams with fine sandpaper, and wipe off the excess foam with a damp sponge (sponge suitable for car washing).

Helpful Hints:

1. to create an original design, make an apron for the kitchen with photo printing from MDF.It can be ornaments, images of fruits, vegetables, landscapes, etc.Also, you can put a glass cover photos, make a collage or even paint surface by hand.
2. use LED backlight to give originality and arrange additional lighting.
3. Dimensions apron for the kitchen should match the work area, capturing the sink, cutting table, stove space.
4. choosing tile, keep in mind that care for a smooth glazed surface is much easier than for relief.
5. Apron Kitchen made of plastic can be an excellent alternative to tile or MDF.Today you can find a high-strength plastic finishing materials that will last for several years without losing its original appearance.
6. to create aprons can be any suitable material in performance - they have to be durable, water resistant and durable.According to these parameters is ideal river pebbles - just imagine what kind of surface can be released from the simple stones, brought from vacation!You can also use the old coins or battered tile for this.
7. Originally looks mirror and glass tile as a covering apron.For grouting, use a lining of transparent silicone.

Video about packing apron in the kitchen of a large tile:

Apron Kitchen, photo

Hopefully this article has helped you understand how to put an apron in the kitchen.Finally - some stylish designs.