Fittings for the toilet cistern : correct advice plumbers

Brief description

device for toilet tank fittings toilet shows the next device from:

• drain holes,
• special side tube serving for the transfusion of water,
• rubber valve cover,
• drain button.

Before installing the immediate encouraged to review the components of the device, its main parts and their characteristics.

device filling the tank with water

This feature allows you to enter the water in a container.The special items in the form of a float valve and shut-off water is taken up to a certain level, do not allow you to exceed your limit.When adjusting the shutter release button float changes its position by adjusting the water level in the toilet tank.When filled with water the float signals the shut-off valve, in turn, regulates the access of water from the tap.

Adjust the fill level of the water tank of the mechanisms responsible:

• above the float,
• shut-off valve.

shutter mechanism of the liquid from draining toilet suggests the following technology.Descent of water is carried out by means of a siphon and sear.Detailed visual device shown in the diagram.

siphon function - Close the drain hole to avoid water stains.Among the types of categories siphon distinguished: a standard "pear" (in the form of a rubber cylinder), such a device is "pear-shaped" siphon using the side tank lever, or "button" on the cover, operating on the principle of lifting it up.Another view of the trigger mechanism of water - the button on the main wall of the tank (often found in the toilet tank, installed in the wall of the toilet room).

installed and setup fittings mechanism

Installing the toilet requires no additional internal structures.Installation and adjustment of the valve is required complement of quality work the toilet cistern.To fix the old, we suggest you review the video containing detailed guidance on the regulation of the drain valve unit.

fittings toilet cistern implies a responsible approach to installation.Detailed engineering and installation of all the necessary components of the smooth operation of the reservoir below.

1. The tank installation kit is a rubber gasket, the need to install - primary.
2. On special bolts set of rubber washers and gaskets.Push bolts in the holes on the one hand, on the other - a washer and nut to rotate.
3. Wear on nut rubber ring that serves a specific sealant.The main thing - that the ring is not allowed to miss any excess moisture and air.
   

   when installing and configuring the reinforcement should be thoroughly inspected every detail.Even minor damage to the surface of the part can lead to damage to the tank.You can use additional sealing agents - sealants, hiding unnecessary details disadvantages.

4. Attach the drain tank to the toilet bowl.
5. Connect the tap and fill the communication mechanism.
6. Close tank lid.Adjust the shutter release button.

Recommendations fixture flushing cisterns

In most cases, equipment for the toilet cistern in its mechanism is simple.Its installation may take even incompetent people in these matters.Knowledge of additional nuances on repair and tuning of reinforcement will help to avoid problems in such matters.

important to be able to adjust the level of the drain valve.Often advised:

• disable the connection rod and the overflow pipe,
• remove excess moisture from the glass retainer,
• change the position of the rack (up or down).

Setting toilet fittings allows you to set "Mode" amount of water drained.Draining can be small or profuse thanks to the correct location of the float mechanism to adjust the flow of the drain water.