Instructions for setting the framework for the bathroom with their hands .Photo examples .

frame Making

Acrylic bathroom is designed so that the main burden falls on its bottom and a considerable load on the basis of calculations of approximately 350 kg (water + weight of the bathing person).The main support should be located just under the bath.Of course, the baths have their legs, but you will agree, it is better to further strengthen the sanitary article, or when the leg break under and you flood the neighbors, there will be little pleasant.In addition to the frame exterior bathroom will be more presentable.

factory frame for baths do not always meet all the requirements of the owner, made a pattern and may not be suitable for the specific conditions of the room.Let's try to make it with their own hands, for any man who knows how to hold a hammer in his hand is not a problem.Consider the production of wooden frame.First, before you start you have to prepare pieces of wood, proolifit them open primer from rotting and fungus and dry thoroughly for two days.

1. on the floor around the perimeter strengthening the wooden blocks, which will be the basis for the framework.
2. mounted on the base uprights, the height of which is necessary to accurately calculate that the bath is not too towered over the frame and not too low.count so that children can get into the bathroom and get out without difficulty.Racks have to be at the corners of the bath and through repeated every 50 cm.The vertical stand is more convenient to mount with metal corners
3. Top uprights stronger still lumber - top frame, which is attached not only to the posts, but also to the wall.
4. Top cover sheet of a thick waterproof plywood, WBP or desirable brands FC.You can take a water-resistant chipboard 25 mm thick, and more.
5. Then on the plywood to make the markup holes bath.For this purpose it is necessary to prepare a pre-mold your bath.Sometimes included in acrylic bath is attached template to simplify the layout and cutting holes jigsaw or handsaw narrow.

Installation bath

frame So, the preparatory stage is completed, the framework for acrylic bath is ready, the fun begins.Now you can install a bath at designated place for it.First, you need to prepare and pour the cement pad on which to recline the bottom of acrylic bathtubs.In that case, if the walls are already showing off brand new tile, you need a bath to fit under it:

• for proper installation first lift the bath to the level of the tile edges and placed under the side bars of wood, pieces of plywood, cutting boards, and more.They should be placed so that the bath seated.
• further regulate cement pad to a bath was not looming.After hardening of the cement can be connected to the bath water supply and sanitation and to start decorating.

we give will not be on the final phase of specific recommendations, here is freedom of imagination.Close the frame can be chipboard, plastic, thick plywood.You can leave access door to pipes or to arrange a bathroom cabinet with doors for storage of detergents or tools.if the doors yourself you do not make.they can be ordered, and then for them to cut a hole in the protective coating.Shields can decorate tiles or paint waterproof paint, such as latex.The final touch - is embedding sealing gaps between tub and wall tiles, between the floor and the frame.

Here, perhaps, and all.The main thing in this work - it is the exact calculations, the correct choice of materials, and the rest - it is the skillful hands.