Pipe cutter for copper pipes and methods of bending

Everything about the tool for bending

Bending of copper tubes is carried out by several methods.The safest and the quality of them is a folding hand benders, and hydraulic lever.The cost of a lever tool is high enough, so it is often taken for rent.Hand - a cheaper option, but its efficiency is not less.Consider all kinds of tools:

• Spring - used in a confined space.It allows you to bend almost any angle.The use is very simple, and the price is low.
• lever - also easy to use, but is able to be used with pipes of one diameter only.The maximum bending angle is 180 degrees.
• Hydraulic - in contrast to the spring mechanism is amplified hydraulically, which allows to spend less energy on the job.It can be used with different diameters, thanks to a set of segments.The most expensive of all types.

hand tube bender for copper pipes completely excludes the possibility of deformation of the walls, but it should be borne in mind that when working with large diameters spent considerable physical effort.Bender is inconvenient to work with long tubes.

Note!For long profiles is better to use a lever tool.

Rolling as an important stage of work with

copper Speaking of processing methods, not to mention the rolling of.Rolling - a process aimed at deformation of the material in the right direction.Any soft metal can act as a material to be treated.Rolling for copper pipes - it is a tool with a variety of nozzles aimed at the expansion.

applied to increase the hole for further connections and spikes.The standard is designed for rolling diameters of 4-22 mm.Quality milling directly affects the operational efficiency of the entire system, so the surface after the operation should be no chips or cracks.There are several types of rolling:

• With eccentrically mounted cone.Such a method is most effective is different because the running eccentric, as an ice rink, and distributes the force over the entire surface.
• Without unions.It is the most universal way, takes up little space, but lower quality than the first method.
• Without cams and ratchet.The cheapest way to rolling.In addition to its cost, it has other advantages.

Note!There are different attachments for rolling, but they raise the price of the instrument.

Pipe cutter for copper pipes "in a national»

deciding how to bend the copper pipe, you can recall the folk methods.Chief among them is the use of sand.Sand is poured in, and both ends are closed with plugs.It allows without any opasok conduct flexion.Make it easy enough, because the sand facilitates this process.Also sand "razopreet", and the wall will not crumple inward.After the operation the tube is washed by a conventional garden hose grains.

Important!For this method, only dry sand should be used.

Another way how to bend copper tubes, similar to the method using the bending tool.This requires a spring with such a diameter that it came profile.The material is put on the spring and bends to the right place.This can be done even on the knee.Upon completion of the material simply gets out.