Technical characteristics of the DSP.Fences made of DSP

Specifications DSP

In Russia size range of the material presented to the following parameters:
width produced plates - 1250 mm (old version, but does not lose its relevance) or 1200 mm (today's standard).It should be noted that the plates produced, referring to both standards.Consider the parameters of the old sample plates.

Dimensions DSP

1250 mm width produces two plates length:

• 2700 mm in length.If we take the thickness of 8 mm, the boards get the weight - 36 kg, 10 mm suggests weight 46 kg, 24 mm - 112 kg.As you can see, the greater the thickness of the DSP to take, the greater will be its index weight.
• With 3200 mm long.According to the standard thickness of 8 mm suggests that the weight will be equal to 43 kilograms, and 10 mm - 54 kg.

new standard in the production of these boards characterized in that they have a much lower weight.In addition to standard sizes are available DSP boards length 3600 or 3000 mm.DSP supplied in the sales space with evenly cut by the parties, which do not require treatment antiseptic.This component is included in the initial composition of the material.

Generally, domestic manufacturers have not sinned poor quality DSP.Therefore, if you have worked through the use of such plates, and after a while found them to swell, you know that you have acquired material, alas, is not produced in Russia.These plates are obviously made somewhere in Asia because there the production of this DSP technology is lame.

As for the DSP, produced by domestic manufacturers, even under very severe frosts and moisture resistance properties of strength plates do not lose.Therefore, a structure in which used DSP will last a very long time.For surface finish will be a sufficient measure or primer coating composition, water repellent.

Structures of DSPs capable of withstanding a large load during operation, because the material has excellent technical characteristics: strength, stability to many environmental factors, moisture resistance.Plates larger sizes can be used for the arrangement of doors, worktops or internal partitions.Quality assurance and the possibility of long operation is the correct installation of the DSP as unprofessional work reduces the quality of the slabs.

fences DSP

If you have a need for high-quality selection of material for the construction of the fence, stop for a cement-bonded plates.This is the best option, since this material does not only give the rigidity of the frame, but also provides good protection against the ingress of moisture.

With the construction of the fence from the DSP is necessary to consider the fact that under the influence changes in humidity plates are susceptible to deformation.It may to some extent limit the scope of the material.To avoid distortion of the surface of the fence of the DSP should be between the plates to leave small gaps equal to only 8 millimeters.You can decorate them nicely, that is converted into design elements or to block them with rods.

feature fence of DSP is that it will be more profitable in financial terms in relation to the fences of corrugated board or OSB.To set a good fence, in addition to the acquisition boards should take care to buy galvanized nails with a diameter of 2.5 millimeters.Nail length should be equal to twice the thickness of the DSP indicator.In addition, in order to secure the plates on the pillars, you will need screws and special rivets.