Installation of paving slabs or how to create a unique design in the yard ?

Installation of paving slabs - the advantages and disadvantages of the material

If you decide to accurately carry out installation of paving tiles with your hands, you should have an understanding of the pros and cons of the street decorations.Let's start by listing the advantages of tiles for pavements:

• procedure for upgrading the site paving tiles can be made regardless of the size and characteristics of your site topography.
• Even if you forget to make installation of any communications under the tile, then it is always possible to remove, to perform the desired operation, and then re-install decorative elements in place.

Attention!The main plus of the material lies in the fact that even in the sultry weather tiles emits no fumes, especially harmful to human health and life.

• In the case near or under the decorative elements are greenery, the tile does not harm them.

Now let's see what shortcomings of paving slabs can upset the landlord:

• In winter, on the tile for the sidewalk can form a thin layer of ice, which can lead to falls and injuries households.

Attention!If break mounting technology material, after a while it may give shrinkage in those places that are poorly installed!

As we can see the merits of submitted decoration element for the street is much greater than the disadvantages.Perhaps it is for this reason that he is a huge success among home owners.

paving slabs Forms

In principle, all the tiles for the pavement can be divided into two main types.The first type refers vibropressed tiles.This type of construction material most often used in places where the vehicle is supposed to travel.For example, it can be locked to the garage.

second type is vibrocasting tiles.Although, as the first type, the range of such decoration element much more that it has no such indicators strength.Especially because it is laid out only in places where people will walk, excluding transport fare.Often vibrocasting tiles combined with gravel paths , if, for example, adjacent to the main direction of the auxiliary path.

Attention!When buying tiles for pavements, carefully inspect it for defects that could lead to a split of the material during the installation!

Taking in hand a building material, it is necessary to see that on it no cracks, chips, and other physical defects.When you are sure that visually tile meets the standards, it is necessary to check the quality of production technology.

For this ASSUME two tiles and knock lightly against each other.If you hear a ringing sound, then everything is in order.If the sound is muffled, it means that in the manufacturing process solution added too much water.This tile will crumble during assembly.

tile installation process to its rightful place

Installation of paving slabs begins with a careful surface preparation for this process.Naturally, for this purpose you will need some tools and accessories.Here they are:

• Wooden or metal stakes;
• Hammer of thick rubber.Such a wide range available in all DIY stores.
• level for adjusting the tiles;
• Regular garden watering can or hose with a sprayer attached to the tap water;
• It should also stock up on a broom, a rake and a long flat object.As a metal tube thereof may act, a piece of wood, and so on.

When you have at hand all these tools available, you can start the installation process.Consider it:

• Alignment area.First of all, with the upper layer of the ground is necessary to remove all the sod.If the surface has depressions or holes, these defects are backfilled with earth or sand.Then the whole thing uniformly leveled using a rake.
• Doing layer mound.As a material for "pillows" can use a special sand-cement mortar or make installation easy on a sandy foundation.Whatever it was, and the height of "cushion" should be around 7 centimeters.
• Installing curbs.It is necessary to make its installation so that 60% of the stone was located above the surface of the tile.In order to securely attach the element of decor can make mortar and put to the curb.
• Leveling sand surface.In order to avoid sagging tiles during the operation, it is necessary to spill the entire sand area.Leveling can be a long flat object.
• Installation of paving slabs.When all stages are passed, we proceed to the installation of street decoration elements in place.To do this, each element is firmly pressed to the bottom surface.If there is such a need, then tamp it with a rubber mallet.Do not forget about the thought-patterns and lay out the elements according to the scheme.
• Grouting.If you do not know how to seal the joints in the paving tiles, then now we can help you with this.As the filler can be applied in ordinary sand.If you want to stiffen the entire structure, then mix with sand cement.Then pour the solution on the tile and carefully Prometheus all seams.After that, remove all remnants prosypki and wash the tiles from a watering can or hose with spray.This jointing of paving slabs completed, as, indeed, himself decor installation.