Laying parquet with his own hands , as it is to choose and to lay ?

laying parquet, a few words about the material

Parquet - is a set of wooden planks, which are made of different kinds.The size of each slat is 9.3 centimeters wide, and 15-40 centimeters in length.They are produced mostly from oak, beech, ash, maple, walnut, cherry and exotic species, such as mahogany, dusiya, wenge, bamboo.Strips are chosen depending on the size of the room.Small strips visually enlarge the space, large, on the contrary, decreased.The optimum width of 5 cm.

For better grip, each strip has a special ridges and grooves.Crest - a protruding element, and a groove - the groove.The slot is usually little more than a comb.To check the quality of the connection need to throw in the square of the four brackets.As a result, you should get a rectangular corners with no gaps, and fastening carried out simply by itself.Also, when choosing parquet blocks is important to pay attention to their quality.They must be free from cracks, chips, knots, especially on the front side.

How to choose the parquet?

On the strength as well as the absence or presence of a marriage (defect), Parquet is sorted as follows: radial, standard, rustic, natural, tangential, SELECT (SELECT or radial).On the strength and moisture resistance is considered to be the best radial grade , which has a monochromatic color scheme, with no defects.

Tangential has many wavy lines on the front side (they are formed by a cut tree), defects are also absent.In Selecta there are just a few curving lines. Standard combines two varieties of radial and tangential. Natural has a small percentage of nicks, plus a few slats may occur cracks. Rustic - most low-quality flooring grade, in which a lot of nicks, cracks or even dents.Choose the best first three grades, since they last a long time and can be restored.

important factor is the type of wood used.It is known that every variety of wood has its own strength, moisture, coloring stability.

classic version is considered to be an oak.Parquet it has excellent performance and is resistant to moisture.Also popular beech and maple.Strips of them are strong enough, but the "capricious" to the extremes of temperature and humidity.

Laying parquet with his own hands

If you have chosen the type bars, but do not know how to stack a piece parquet, then we give below a detailed methodology.So, the technology of laying parquet includes several stages.First you need to align the floor, and then to lay parquet.Aligned screed.The minimum thickness of the coating should be about 4 centimeters.We need this in order to drive freely in the foundation anchors.Method of preparation and application, it is always indicated on the package.

Next Technology laying parquet method "flooring on nails» includes the installation of plywood, which will be carried out and laying parquet.All strips are glued to the bottom of this, and for greater strength and even nailed.For single strap 3 to be nail 2 and a lateral groove in one end.Thus they need to be nailed at 45 degrees.Interconnected strips are connected by tongue and groove.

method of laying parquet can be very different, depending on the desired pattern.The most common is «deck» , when the strips are arranged parallel to each other in the longitudinal direction.Also popular «direct box» or «Vietnamese» , having the form of interlacing of transverse and longitudinal strips.In Russia, the most famous «herringbone» , in which the strap is laid at an angle of 45 degrees to the adjacent walls and at an angle of 90 degrees to each other.

the final stage for durability and resistance to moisture and parquet can be covered with varnish.Laying parquet, Video Application is submitted on our website will help you create a unique interior.