How to clean a sewer pipe without much effort ?

Methods for cleaning sewer drains

1. Chemical.It involves using chemically active ingredients for cleaning the drain.They act on the basis of organic jams, entering it into a chemical reaction and it dissolves.This principle of cleaning is simple and does not require manpower, enough to buy a vehicle in the store and fill up in the pipe, and after a time, rinse thoroughly with water.
   
   But should understand that if congestion in the pipe impressive, then no chemicals will not help.Chemicals cope only with organics and other contaminants should take stricter measures and instruments.
2. Mechanical.For him, tend to use the machine tool, which, in fact, strikes a stopper by direct contact.By this method include the use of a cable.As for the cable, it is introduced into the tube and thereby breaks the mash.It's worth noting that the method is cheap, once bought a cable, it can be used repeatedly, and household chemicals in addition to being expensive, yet ends quickly and is not always effective.

cleaning process something like this is characterized by labor costs, but in stages following looks.

cable is lowered into the open space of the water drain and gradually move to the place of corks, with scroll tool.When groped tube, you need to add power and punch her in the gap, so that the flow of debris stuck merged, then a few more times to scroll the cable in place of congestion, and then rinse with plenty of water.

In words, it seems that there is nothing complicated about it, but difficulties still arise.One of them - a search for postcards sewer hole (nozzle).Often plumbers spun trap in the toilet tank, or audit.Also on the cable accumulate a large amount of dirt that is pulled out of the tube, so get ready for the fact that the work is not clean.

Hydraulic.The process destroys the stopper in the sink using plain water, or rather, its pressure force and hydraulic shock.Working tool in this process is a plunger, and hydraulic head (dear).How to clean a sewer pipe, certainly solves the landlord, should understand that this type of cleaning is not less time-consuming than mechanical, but is much more efficient and productive.

usual plunger, unfortunately, able to deliver only small impurities and then with the help of chemistry.

But hydrodynamic nozzle, at the next photo can do almost miracles.

How to clean a sewer pipe plunger:

1. drain hole filled with water, is applied on top of the plunger.
2. The handle with a force pushing the plunger up and down, from yourself and to yourself, while creating within the movement of water and pressure.
3. Water hammer destroys cork.

hydraulic nozzle

nozzle is mounted on the cable, and is introduced into the pipeline until the cork, then a special compressor fed plain water under high pressure.Again, the same hydraulic shock destroys the plug.Under such pressure and flow of water is not able to resist any sewer drain.

Thermal.Is to submit to the tube warmed couples.Use a tool like a nozzle.Instead of water generates steam, which pushes the blockage without much liquid as is the case when using water.Steam does not add weight and volume are clogged, and also disinfects the pipe is easily clogged with organic fights and even with ice jams.

This method proved to be the most effective for any kind of contamination, equipment worth decent money.Therefore, it is available from emergency teams and private services cleaning houses.