Watering with their hands

The fact that the plants and all sorts of crops grown in suburban areas need regular watering, no one doubts.Another thing is how to make sure that watering is not turned into a grueling haul buckets of water from the drum to a bed?Here, as they say, the problem should be approached wisely.Most likely, the ideal solution would be to set up a system of irrigation area with your hands.

What could be the ways of watering the plot?

to where you yourself did not invent and do not plan to, but once again create a bike you are unlikely to succeed, as there are only three basic types of irrigation area:

• irrigation;
• drip irrigation;
• subsurface irrigation.

Sprinkler important when you are caring for a lawn or flower bed.Just in time for this method are based avtopolivom built with his own hands the system, because the sprinklers are considered the easiest varieties of lawn irrigation systems that can be done personally, because, their design consists of a pump, hoses and sprinklers.

If you need to take care of the garden trees, greenhouses and gardens, while effective to drip irrigation or micro-irrigation system.In general, drip irrigation own performance system can provide you with great savings.Only in order to create it, it is desirable to do the preparatory work before that period, as the time comes to spring field work, that is, at the end of winter.Although it is not so important.

Well, if we are talking about the perennial hedges, then the method of subsurface irrigation by porous pipes or hoses - would be exactly what you need.

Taking into account the relevance and urgency of the use of drip irrigation systems, we recommend you to our website to read more about the photos and video lessons on how to created a system of watering by hand.

How to make the system of drip irrigation on their own?

As with any construction, to begin the process of creating an irrigation system is necessary to competently thoughtful planning.

1. So draw a suburban area plan and mark the need for watering zone (beds or plants).

2. Then, consider the placement of the basic plan of pipelines, valves, hoses and drippers individual, taking into account the terrain on which is your site.For example, if there is a clearly-marked slope, then the tube must be placed horizontally and hoses - sloped.

3. Do not forget that the garden watering system created its own, can provide multiple connections and branching.Therefore, it should be noted all tentative locations, as well as to count the number of corresponding elements (connectors, splitters), including plugs and valves.

4. Then does not hurt to think about the type of equipment used and the trading brand that you want to give preference to.Of course, this may depend on the final value of your irrigation system.

5. To simplify laying pipelines, it is best to use plastic products.Firstly, they are much cheaper, and secondly, it is easier than metallic counterparts.In addition, these pipes will not enter into contact with any corrosive elements fertilizer and not succumb to rust that will significantly increase their service life.

6. Pay attention to the water supply.If the water in your area is not available, then the best decision is to set the inflatable tank at a half or two meter elevation.

7. Not be amiss to install filters that minimize the possibility of contamination of hoses and drippers clogged.

Remember that installation of irrigation systems with their hands should be done only after the formation of the main beds, flower beds and other similar areas on the site.

Video editing their own hands watering system