Armchair in wood with their hands

Available seats in the house helps to make the vacation more comfortable and enjoyable, and gives a feeling of lightness and tranquility.There are many options for seating, they differ in shape, purpose, but they are united by the fact that they all make a comfortable life.To learn how to make wooden chair consider further.

Benefitsand disadvantages of wood chair

Getting manufacturing armchairs process should define the material that will serve as its foundation.This article will talk about how to build a wooden chair.Therefore we offer to get acquainted with its main advantages:

1. Ecological safety.

Wooden furniture has always distinguished natural, harmless and hypoallergenic.Therefore, it is a wooden chair will not give any discomfort in its use, as a base material acts as an environmentally friendly material.

chairs made of wood Photo:

2. The strength and durability.

Wooden furniture is durable, resistant to mechanical impacts and operating duration.

3. aesthetics and variety of shapes.

choosing a form for a wooden chair from a tree, it is difficult not to get lost in their diversity.In addition, the use of threads, special paints, capable of making the chair more aesthetic and attractive.

Furniture made of natural wood is quite expensive, but if you try to build a chair made of wood with their hands, you get to save three times more money than when buying.

chair made of wood with their hands

offer available with the option of manufacturing of wooden trellis chair, which has a sloping seat and offers the convenience and elegance.

This method of construction of the chair is a versatile, so using it will build a furniture such as a table, shelf or a stool.

to carry out the work will need to have:

• bar, section 2,8h2,8 cm;
• veneer consisting of several layers, the thickness of which is 1.8 cm;
• stains, paints and varnishes;
• threaded inserts;
• dowels, screws;
• few studs;
• material for grinding;
• compactor and varnish solutions used when working with wood;
• oil paint black and red colors, which will help the back and legs of the chair bright contrast among themselves.

Among the tools will need to have:

• circular saw bench type;
• drill with drill bits;
• miter box;
• planer;
• pliers;
• screwdriver;
• sponges and paint brushes.

Select the timber, and the main requirement to it stands the cross section size, it must conform to 2.8 cm. Pre-prepared blank must be perfectly flat and smooth.Before work, check them for cracks and irregularities.

Drawings wood chairs:

In accordance with the drawings cut timber for a few bars, the length of each 55 cm In order to collect the rear and side walls required thirty-six strips..In addition, there must be carrier bars mounted in the seat area.

Secure the bar with the stops and cut it using a wood saw.

The end portions of each bar should be marked, and then the holes are drilled with a diameter of 0.8 mm.The interval between the center and the end point of the bar is 2.5 cm. With the help of a drill rack carefully measure and raschertite details before their drilling.

To chair had a presentable appearance and meets all safety standards and regulations, end portions treated with emery paper, and on the edges are chamfered.

for rounding the longitudinal edges used plane, and then sandpaper, which will help remove all burrs and polish the surface.To separate one from the other strap chair parts are used, called "checkers".For their manufacturing wooden elements need to cut the square shape, size 2,8h2,8 see. On the edges of the pieces necessary to remove the chamfer and drill holes through nature.These holes should coincide with the slots on the bar for their harmonious connection.Each strip is glued on the two "bombs" on both sides.In each hole is inserted into one hairpin, which was built from a clipping materials.Along the edges of the blank are glued and aligned with the help of the rail.With the clamps pull together all the parts together and leave to dry completely.

Stain will help keep the tree in its original form for many years.For the machining of parts, should they hang on a pre-prepared bar with nails or bolts.Install all the blanks on nails and apply the stain with a sponge.Excessive stains should be removed with a brush.

After drying wood stain, move on to the next process, and a coating comprising nulevkoy parts paints.To prepare the dry details of a special unit consisting of boards, which are glued dowels.

The next stage involves the production of a back seat and a wooden chair.You will need a small sheet of plywood, which is cut out of the workpiece size.By means of screws, they are joined together but this should provide holes for dowels, which provide additional strength chair.This design is painted red oil paint and waiting for complete drying.

The details that have been made of timber, drill holes with a diameter of 0.8 cm. In such a way as to ensure the smooth passage of the studs on them.Connect all the parts together using pins and threaded bushings.To fasten the seat, several drill holes in the supporting parts of the construction.On the bottom of the chair seat fasten to the body of the chair.

This chair will appreciate its brightness, beauty and convenience of residents and guests of the house.

Production of wooden garden chair: instructions and recommendations

most harmoniously will look wooden chair among flowering garden plants.But, before proceeding to their manufacture, we offer to get acquainted with the general recommendations that will help to make it:

1. The first requirement for a garden chair - its portability.This piece of furniture to be bulky and not easily portable from place to place in the case of bad weather.

2. When choosing the type of wood is best to stay on oak, beech or walnut breed.In addition to these options, you can use pine, aspen, cedar, larch.Such a tree is the most durable and stable to mechanical effects and moisture.

3. Since the seat is in the street, it is exposed to sunlight, moisture and precipitation, so it is recommended to take measures to protect the wood from external stimuli.

4. Before using the boards, they should be folded and put in a room with a canopy, they prosushatsya and become stronger under the influence of wind.After that will process their grinding, impregnation with antiseptics and varnish solution.This is followed by drying of the boards and coating paints.

5. The number of knots in the tree affects the prominence of its texture.In addition to the appearance of the chair looked like a natural tree, it is better to cover a colorless varnish.

6. When assembling the chairs for the garden, try to fasteners are well recessed into the tree.Otherwise, you may experience the hooks on clothing.

Preparatory work include working with wood, its drying and coating of a variety of materials.For using the board with a thickness of 2 cm

During manufacture of garden chairs will need to have:

• two hind legs, the size of which is 21h255h788 mm.
• two front legs, the size of 21h76h534 mm;
• reference armrest size 21h128h407 mm;
• the back of the chair as a back size 21h280h915 mm;
• jumper - 21h52h590 mm;
• rear support of the armrest - 21h78h611 mm;
• two boards for insertion - 13h21h255 mm.

as consumables requires:

• tverdodrevenyh keys - see 2,4h6 - 20shtuk;
• 20 pieces of brass screws, size 0,45h0,5 cm;
• 20 pieces of brass screws 0,45h0,32 cm;
• sandpaper for grinding;
• adhesives based on polyurethane;
• varnish and lacquer furniture;
• cardboard material;
• masking tape.

to carry out work on the construction of a garden table, as tools, need to have:

• circular saw;
• manual milling machines;
• elektrorubanka;
• hacksaw;
• electric drill;
• screwdriver;
• polishers;
roulette
• ;
• level;
• pencil.

Garden chair made of wood, drawing:

Use the panel with a wide thickness for the manufacture of the rear legs, backs, armrests and seating.To receive them, you must choose similar in color and texture of the board and their pre-taped together.

In order to build the rear legs using a prepared stencil, in which they will be cut out.Apply it to the board, make a drawing of a tree, with a pencil and connect the two pieces with adhesive tape, so that will make just two parts.Remember, it is better to make the pattern a few millimeters more than the drawing, then to a plane or a router to fit the item under the required size.

back construction procedure involves sawing of blanks preformed glued boards.Then required to mow the lower backrest part for twelve and a half degrees, so that it is perfectly joined with the hind legs.A top part of the back is rounded radius of 0.9 cm. Then collect the product, customize it with the details of the nearest millimeter.

Fix the rear legs of the chair to the back with screws and glue for wood, taking care of pre-drilling holes.With gusset fasten together the side portions and legs.

Rods insertion character will help close the gap formed.To secure the inserts using screws.Note that the reliability of the chair depends on the quality of the connection of all the details.Boards should be directed to the opposite side of the legs.In accordance with the outer side of the drawing board sawdust connected parts.Lots of unprocessed character is not stripped.

slot, select the back blank, while the seat is in the back at an angle, to ensure that the joint density.

Proceed to the excision of the front legs, and the upper portions thereof beveled at an angle of six degrees.Attach the front legs to the seat structure using screws and glue.

Garden chair should be different special reliability, it is recommended to use an extra jumper as the progam by which the chair is enhanced strength.For cutting out the jumper, pre-measure its location and cut out the part size.

now proceed to cutting out the wedge-shaped armrest supports, which are fixed on the front legs and make the chair easier to use.When all the parts are assembled, it is necessary to proceed to the final polishing of the chair.smooth surface should remain after completion of the process.If desired, paint the chair in the desired color or cover with varnish, which will help maintain the texture of wood.

rocking chair for two people with their hands

To make such a seat will need a minimum set of tools that includes:

• jigsaw;
• disc sander;
• screwdriver;
• few drills to work with wood;
• bit to work on a screwdriver;
• paint brush;
roulette
• ;
• pencil;
• building level.

This model of chair is quite simple.Arc shape reminiscent chair, which consists of two side pieces connected to each other a large number of boards.

Note the manufacture of seat material, since its size is quite large, then it will be placed directly in the yard or in the garden, so materials must be of high quality.Euro plywood used in the process of manufacturing the side portions rocking chair.Its thickness should be 3 cm. From this material necessary to saw two side parts, consisting of three drawer side.Layout is made using patterns, pencil and tape measure.

Scheme manufacturing rocking chairs:

In transferring the pattern to the workpiece is possible admission of the smallest error.The main condition for the proper functioning of the chair is cutting out the identity of the two side pieces.Next

require bar, sizes 5h2,5 see. With the help of a jigsaw saw off him thirty-five equal boards, 1.2 m long. In principle, the length depends on the desired length of the chair, so it is subject to correction.As the fasteners are recommended:

• SCREW 0,5h12 cm - about 15 pieces;
• screws on derevu0,4h4,5 cm - 150 pieces.

first work process after cutting parts - their grinding.To carry out this procedure with a good tools and skills to work with him, is not difficult.But, keep in mind that end portions should be given special attention.

further processing of the material to be using stain and varnish.It is best to apply the solutions in the two layers, waiting for the complete drying of each of them.In order to avoid absorption of moisture, treat wooden parts with hot linseed oil.

final process - assembly of rocking chairs.Three side-bar located at the top, center and bottom of the seat.They are fastened with SCREW.Watch out for the strength of the compounds as well as longevity of using the chair depends on them.

For drilling holes for fasteners in areas chairs that form the surface of the direct recommended conductor.This device will help facilitate this work and make all the holes the same.Otherwise, do the job manually.

Use special putty, which will help hide the holes from the screws.In the presence of cracks or defects, putty will help get rid of them.Now is the process of staining the seat or cover it with varnish.Several pillows adorn this piece of furniture and help to make it more clear and easy.