How to make a self-leveling floor with their hands - and video technology

Flooded floors today rather populyarny.Eto is justified.This type of floor has unique properties.It is characterized by durability, strength, coating is not afraid of moisture, temperature extremes, chemical compositions.It is also fireproof.High temperatures can not provoke the release of toxic substances coated.Industrial floor long enough period.Due to its high durability they look perfect for years.Care for them is not difficult.The surface is easy to clean, does not need an extra daily care.The surface of the self-leveling floor is not conducive to reproduction of microorganisms, mold, dust does not delay.By the way, it is possible to arrange on top of the warm pola.Nalivnye flooring is not recommended to arrange on a wooden base.

beautiful example of filler floor made with their own hands

technology create self-leveling floor is relatively simple.Work can be well run with their own hands.It is important to carefully prepare, prepare the ground.

technology, how to make your own floor filler

technology create self-leveling floor is relatively simple.Work can be well run with their own hands.It is important to carefully prepare, prepare the ground.

Substrate Preparation

1. surface to be cleaned, leveled.Processed places where there are oil stains.Removes traces of paint.Cement (concrete) tie is certainly durable, is not crumbling, not crumbling.In the formation of such sites are removed, primed by filling with a mixture of dirt.The composition of the self-leveling floor - Self-leveling.Therefore, the surface of the base, of course, must be flat, smooth;bumps, depressions must be smoothed.
2. Once primed surface by roughening the surface, leveling mixture to adhere well to the surface.Suitable soil betonkontakt.There are other plasters.Work with a brush, roller.

Gruntuem floor surface with a roller

1. Preparation pomescheniya.Pered pouring clean baseboards.The room on the perimeter carefully pasted over damper tape.The optimum temperature of 10-25 ?.Shading is not performed at low temperature.Drafts should be deleted.

Fuel mixture

When her cooking instructions should be explored.Typically, a container filled with water, poured a dry composition.It is necessary to mix the solution embodied in an electric mixer.

The figure shows an example of the preparation of the working mixture

resulting homogeneous solution (no clots) are used for a quarter of an hour (15-20 minutes) .Not should immediately prepare a lot solution.By the way, if the mixture is prepared with hot water, then it should be used quickly because of fast curing components.It is unacceptable to use a lot of water - finished floor is unstable.

Application leveling solution

should be reserved in advance tools: a) with a spatula, distribute the mixture, b) a spiked roller that removes bubbles, evenly distribute the solution.

Fill (narrow band) begins with a distant corner.Spatula gently spread the leveling layer.The solution should fill any gaps, forming a smooth surface.

Removal of bubbles and blisters

spiked roller gently bubbles are removed.The layer is completely leveled.If the layer of fat, spiking is done more often, but the maximum - 40 minutes - the time gusteniya.To move on the floor can be in the shoes with special spikes - on krakostupah.Gradually filling, moving toward the exit.

Paul drenched his hands

Video - floor filler made with their own hands